HP StorageWorks 2/32 HP StorageWorks Fabric OS 5.2.1b Release Notes (AA-RWEYC- - Page 8

For a list of retired products, visit the HP web site http://www.hp.com. Table 1 Current supported Fabric OS versions Model HP StorageWorks 1 Gb Switch Earliest compatible version Recommended version 2.6.2c 2.6.2d1 HP StorageWorks SAN Switch 2/8-EL, HPStorageWorks SAN Switch 2/16, MSA SAN Switch 2/8 3.2.1 3.2.1b HP StorageWorks Core Switch 2/64 5.0.5 5.0.5c HP StorageWorks SAN Switch 2/8V, HP StorageWorks SAN Switch 2/16V, HP StorageWorks SAN Switch 2/32, HP StorageWorks SAN Director 2/128 5.1.0d 5.2.1b HP StorageWorks 4/64 SAN Switch 5.1.0d 5.2.1b HP StorageWorks B-Series MP Router Blade, HP StorageWorks 400 MP Router 5.1.0d 5.2.1b HP StorageWorks B-Series iSCSI Director Blade (Brocade FC4-16IP) 5.2.1b 5.2.1b HP StorageWorks SAN Switch 4/32 5.1.0d 5.2.1b HP StorageWorks 4/32B SAN Switch 5.2.1b 5.2.1b HP StorageWorks MP Router XPath OS 7.4.x XPath OS 7.4.1d Brocade 4Gb SAN Switch for HP p-Class BladeSystem, Brocade 4Gb SAN Switch for HP c-Class BladeSystem 5.0.5 5.2.1b Fabric Manager 5.2.0a 1 Fabric OS 2.6.x can interoperate with Fabric OS 5.2.x via FC routing capability of the HP StorageWorks Multi-protocol (MP) Router. HP StorageWorks 400 Multi-protocol Router, or HP StorageWorks B-Series Multi-protocol Router Blade. Refer to the Fabric OS 5.2.1b release notes (this document) for additional interoperability information. IMPORTANT: The B-Series MP Router blade (for use with the 4/256 Director only) must run Fabric OS 5.1.0d or later. Note that the Core Switch 2/64 does not support the B-Series MP Router blade. Firmware upgrade instructions IMPORTANT: HP strongly recommends that users upgrade to Fabric OS 5.2.1b as soon as possible. To access the latest Fabric OS 5.2.1b firmware, configuration files, and MIB files, go to the following HP web site: http://www.hp.com/go/san. 8