HP StorageWorks 2/32 HP StorageWorks SAN Switch Rack Mount Kit Installation In - Page 10
Attach the rear mounting brackets to the rear rack uprights by completing one
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Caution: For proper air flow, the SFP media side of the SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8 must face the rear of the rack. This mounting allows air to enter from the front of the rack and to exhaust at the rear of the rack, similar to other rack-mounted equipment. This prevents switch overheating, which may cause it to fail. To install the switch in a rack: 1. Check contents of the shipping carton to verify all the required parts and hardware are available. 2. Choose a mounting location in the rack for the switch. 3. Attach the rear mounting brackets to the rear rack uprights by completing one of the following steps: - For an HP 9000 Series or comparable EIA rack, assemble each of the two brackets with (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and (2) #10 adapter washers as shown in Figure 2. Figure 2: Installing the rear mounting brackets (HP 9000 Series or comparable EIA rack) 10 SAN Switch Rack Mount Kit Installation Instructions