HP StorageWorks 2/32 HP StorageWorks SAN Switch Rack Mount Kit Installation In - Page 18
HP StorageWorks 2/32 - SAN Switch Manual
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
7. Insert the switch with the attached inner rails into the outer rails. Note: This step applies to both the HP System/e rack and the HP 9000 Series or comparable EIA rack. Figure 9: Installing the switch into a rack (HP 9000 Series or comparable EIA rack) Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 9 and Figure 10. 18 SAN Switch Rack Mount Kit Installation Instructions
18
SAN Switch Rack Mount Kit Installation Instructions
7.
Insert the switch with the attached inner rails into the outer rails.
Note:
This step applies to both the HP System/e rack and the HP 9000 Series or
comparable EIA rack.
Figure 9:
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side. See
Figure 9
and
Figure 10
.