HP StorageWorks 4/16 Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 137

12 EM-1034 EM-1034 Message , [EM-1034], ,, ERROR, , set to faulty, rc=. Probable Cause Indicates that the specified field-replaceable unit (FRU) has been marked as faulty for the specified reason. Recommended Action Try reseating the FRU. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the FRU. Severity ERROR EM-1035 Message , [EM-1035], ,, ERROR, , 2 circuit paired Power Supplies are faulty, please check the AC main switch/circuit to see if it has power. Probable Cause Suggests that since both Power Supplies associated with one of the 2 main circuits are present but faulty, maybe the circuit's switch has been turned off, or the AC power source has been interrupted for that circuit. The Switch side value is either "left" or "right" designating which circuit switch, facing the cable side of the chassis. The Switch side value indicates: • "left": controls the odd numbered power supply units. • "right": controls the even numbered power supply units. Recommended Check that the identified AC circuit switch is turned on, that the power cord is properly attached Action and undamaged, and that the power source is operating properly. Severity ERROR Fabric OS Message Reference 85 53-1000600-01