HP StorageWorks 4/16 Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 510

73 TRCE-1009 TRCE-1009 Message , [TRCE-1009], ,, ERROR, , Unable to alert active CP that a dump has occurred. Probable Cause Indicates that the standby CP is unable to communicate trace information to active CP. This message is only applicable to the Brocade 24000 and 48000. Recommended Action Run the haShow command to verify that the current CP is standby and the active CP is active. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1010 Message , [TRCE-1010], ,, ERROR, , Traced fails to start Probable Cause Indicates that the trace daemon (traced), used for transferring trace files, failed to start. The trace capability within the switch is unaffected. The traced facility is normally restarted automatically by the system after a brief delay. Recommended Action If the message persists, reboot the CP (dual-CP system) or restart the switch. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually transferred to target ' ': . Probable Cause Indicates that a manual transfer of trace dump files has occurred. Recommended No action is required. Action Severity INFO 458 Fabric OS Message Reference 53-1000600-01