HP StorageWorks 4/16 Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 224

29 FW-1035 FW-1035 Message , [FW-1035], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has risen above the high boundary. Frequent fluctuations in temperature might indicate a deteriorating SFP. Recommended Replace the SFP. Action Severity WARNING FW-1036 Message Probable Cause Recommended Action , [FW-1036], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Indicates that the temperature of the small form-factor pluggable (SFP) has changed from a value outside of the acceptable range to a value within the acceptable range. Frequent fluctuations in temperature might indicate a deteriorating SFP. No action is required. Severity INFO FW-1037 Message , [FW-1037], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended Incoming laser fluctuations usually indicate a deteriorating SFP. If this message occurs repeatedly, Action replace the SFP. Severity INFO 172 Fabric OS Message Reference 53-1000600-01