HP StorageWorks 4/64 Brocade Fabric OS Message Reference Supporting Fabric OS - Page 436

66 SEC-1071 SEC-1071 Message , [SEC-1071], ,, ERROR, , No new security policy data to apply. Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time. Recommended Verify that the security event was planned. First change some policy definitions, then run the Action secPolicyActivate command to activate the policies. Severity ERROR SEC-1072 Message , [SEC-1072], ,, ERROR, , Policy List is Empty! Probable Cause Indicates that the specific policy type is empty. The security database is corrupted for unknown reasons. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable Cause Indicates that the specific policy type is empty. The security database is corrupted for unknown reasons. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR 384 Fabric OS Message Reference 53-1000600-01