HP StorageWorks 8/80 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 912
Total Bandwidth, Bandwidth Demand, Flags, Operands, Examples, topologyshow
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 912 highlights
2 topologyShow Total Bandwidth The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbps is adjusted to the nearest power of 2 value. A bandwidth in the range of 0.512 Gbps Included) to 1 Gbps (not included) is adjusted to the 0.512 Gbps value. No adjustment takes place if the bandwidth is greater or equal to 1 Gbps. Bandwidth Demand The maximum bandwidth demand by the in ports. Flags Always D, indicating a dynamic path. A dynamic path is discovered automatically by the FSPF path selection protocol. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands The following operand is optional: domain Specify the destination domain for which to display the topology information. Examples To display the topology on a single switch: domain is local, details are not displayed. switch:user> topologyshow 1 domains in the fabric; Local Domain ID: 97 When executed from an edge fabric, topologyshow displays details for all domains, including local domains and local translate domains: switch:user> topologyshow 6 domains in the fabric; Local Domain ID: 7 Domain: Metric: Name: Path Count: 1 10500 fcr_xd_1_1 1 Hops: Out Port: In Ports: Total Bandwidth: Bandwidth Demand: Flags: 2 11 0 1 2 3 4 5 6 7 8 9 15 8.000 Gbps 1275 % D Domain: Metric: Name: Path Count: 2 1000 fcr_fd_2 1 Hops: Out Port: In Ports: Total Bandwidth: Bandwidth Demand: Flags: 2 15 0 1 2 3 4 5 6 7 8 9 11 2.000 Gbps 4000 % D 882 Fabric OS Command Reference 53-1001337-01