HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.2b release notes (5697-0351 - Page 21

Fabric OS version Fabric OS 6.1.2x Note: HP does not support Fabric OS 6.1.2c. Mode: All 8-Gb switches (except 8-Gb SAN Switch for HP BladeSystem cClass and EVA4400 embedded switch module, which do not support v6.1.2x) Added the ability to change portcfgfillword to IDLE or ARB(FF) mode. Regardless of the Fabric OS version that was previously installed, all ports default to IDLE [mode 0]. However if they were changed to ARB(FF) [mode 1] manually, they remain in ARB(FF) mode. Can be changed by the user. 0-IDLE for Link Init, IDLE for fill word 1-ARB(FF) for Link Init, ARB(FF) for fill word (NOTE: not supported with XP storage arrays) WebTools functionality moved to DCFM The functionality that was moved from WebTools in 6.1.1 to DCFM is applicable to both DCFM Professional and DCFM Enterprise. Table 8 describes these changes. Table 8 WebTools functionality in DCFM Function Add unzoned devices WebTools 6.1.0 Zone Admin DCFM Configure > Zoning Reverse Find in the zoning dialog provides the view of the zoned and unzoned devices in the fabric if all zone members are selected for Find. Comments Analyze zone config Zone Admin Configure > Zoning: Reverse Find in the zoning dialog provides the view of the zoned and unzoned devices in the fabric if all zone members are selected for Find. Device Tree and Topology: Connected End Devices: Custom display from the top level in the main frame provides the device tree and topology view for all the zoned devices if all zones are selected in the active zone configuration. Define device alias Zone Admin Device accessibility matrix Zone Admin Configure > Zoning Configure > Zoning The Compare dialog provides the Storage-Host and Host-Storage view in a tree representation that is comparable to the Device Accessibility Matrix when all devices are selected. Fabric events Monitor > Fabric events Monitor > Logs > Events HP StorageWorks Fabric OS 6.1.2b release notes 21