HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU
HP StorageWorks MSA 2/8 - SAN Switch Manual
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks MSA 2/8 manual content summary:
- HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 1
HP StorageWorks Fabric OS 3.2.1b release notes Part number: AA-RUQYG-TE Seventh edition: August 2006 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 3
of HP StorageWorks Fabric OS 3.1.3 have been incorporated in this release. Major new features include: • Additional support allows a switch this firmware release. Please note, HP never released and does not support Fabric OS 3.2.1a. Update recommendation HP strongly recommends that users upgrade - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 4
product models Fabric OS 3.2.1b firmware is supported on the following switches only. • HP StorageWorks MSA SAN switch 2/8 (SilkWorm 3000) • HP StorageWorks SAN Switch 2/16 (SilkWorm 3800) Operating systems See http://www.hp.com for a list of supported operating systems. Fixes Table 1 lists - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 5
3.2.0x. SAN Switch 2/16 was reported to flood a host by sending n_port logins (PLOGI) every millisecond. SAN Switch 2/16 displayed a stack overflow message and panicked during normal operation. SAN Switch 2/16 only - After using Fabric Manager v5.0.0 to change the admin password, the switch reverts - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 6
running Fabric OS 3.2.1 or later, click B-Series Switches - Entry Level. 5. Click HP StorageWorks MSA SAN switch 2/8. 6. Go to the Product information section, located on the far right side of the web page. a. Select Software, firmware & drivers. b. Go to the Select operating system section. Select - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 7
switches. Before adding a Fabric OS v3.2.1 switch to such a fabric, refer to the HP StorageWorks Fabric OS procedures 3.1.x/4.1.x user guide for information on the Extended Edge PID format. NOTE: Switches that your fabric size exceeds the supported switch configuration limit and tells you how long - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 8
1.4.2_03 5 Red Hat Linux 9.0 Mozilla 1.6 1.4.2_03 6 Solaris 2.8 Mozilla 1.6 1.4.2_03 Non-default operands The use of non-default operands for diagnostic commands is recommended for advanced users and field support only. Save the zone database configuration immediately after an upgrade When - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS V3.2.1b Release Notes (AA-RU - Page 9
Unsupported commands The slotOff and slowOn commands are now obsolete; use slotPowerOff and slotPowerOn instead. The portLogPortShow command is also now obsolete. Fabric OS 3.2.1b 9
HP StorageWorks
Fabric OS 3.2.1b
release notes
Part number: AA-RUQYG-TE
Seventh edition: August 2006