HP Surestore 15 Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI-3 - Page 68
Format (PF), Save s (SP), Parameter List Length, Block Descriptor Length, Table 2-18
View all HP Surestore 15 Slot with DLT7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Library SCSI-3 Command Set Mode Select (6) Command (15H) Page Format (PF) Zero indicates that all parameters after the block descriptors are vendor-specific. One indicates that the MODE SELECT (6) parameters that follow the header and block descriptor(s) are structured as pages of related parameters. Save Pages (SP) Zero indicates the device server shall perform the specified MODE SELECT (6) operation and not save any pages. One indicates that the device server shall perform the specified MODE SELECT (6) operation and save as non-volatile. Table 2-18 Byte 7 0 1 2 3 Parameter List Length The parameter list length field specifies the length in bytes of the mode parameter list. The device server will terminate the command with CHECK CONDITION status if the parameter list length truncates the mode parameter header, mode parameter block descriptors, or mode page. Mode Select (6) Parameter Header 6 5 4 3 2 1 0 Reserved (0) Reserved (0) Reserved (0) Block Descriptor Length (0) Block Descriptor Length This byte is not valid for libraries. 2- 24 Chapter 2