HP Surestore 28/48-Slot with DLT4000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 110
Test Number, FRU Locator, Error Code, FRU 1, FRU 2
View all HP Surestore 28/48-Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Library SCSI-3 Command Set Receive Diagnostic Results Command (1CH) Table 2-47 Receive Diagnostic Results Parameter List Byte 7 6 5 4 3 2 1 0 28-29 Plunge Motor Actual Position 30-31 Translate Motor Commanded Position 32-33 Translate Motor Actual Position 34-37 Time Stamp NOTE Test Number The diagnostic test number. This will not be a sequence number, but the specific test that failed. Refer to Table 3-6 on page 3-27 for a list of the library diagnostic tests. FRU Locator Returns either the drive number or level number, then slot number (4 bits each). This helps isolate the error. Error Code Determined by fault isolation, this error code indicates the cause of the failure. The values of the hardware error codes are in Table 3-4 on page 3-16. FRU 1 The FRU most likely to be at fault. (See Table A-1 on page A-2.) The FRUs numbers returned are indicators for the most likely cause of an error, but may not be the actual cause of a problem. Simply changing the listed FRU may or may not fix the associated problem. FRU 2 The second most likely FRU to be at fault. (See Table A-1 on page A-2.) 2- 66 Chapter 2