HP Surestore 28/48-Slot with DLT4000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 136
Drive Status for Ultrium LTO, For more information on Drive General Status
View all HP Surestore 28/48-Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Library SCSI-3 Command Set Read Buffer Command (3CH) Table 2-73 Drive Status for Ultrium LTO Byte 7 6 5 4 3 2 1 0 0 IPMB Message status 1 Board status 2 Board type 3 Been Boot setup code Reserved Controller number 4 Reserved 5 6 7 8-15 Fan Drive detect power Reserved Drive connected For factory use Reserved Drive statusa Reserved a. For more information on Drive General Status, see the LTO Specification for a Tape Drive Automation Controller Interface. IPMB Message status: See Table 2-68 on page 2-87. Board status: Current status of the controller board. See Table 2-69 on page 2-88. Board type: The type of controller. See Table 2-70 on page 2-88. Been setup: Set if the controller has been given its setup variables. Boot code: Is the controller current running boot code? 1 = Yes; 2 = No. Controller number: Controller number of the above type (i.e., controller 1 of type drive). Fan detect: 1 = Fan is spinning; 0 = Fan is not spinning. Drive power: 1 = Power on to drives; 0 = Power off to drives. Drive connected: 1 = Drive is connected on RS422; 0 = Drive is not connected on RS422 or drive power is off. 2- 92 Chapter 2