HP Surestore 28/48-Slot with DLT4000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 151
Current ALPA requested, Lock Mapping
View all HP Surestore 28/48-Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Library SCSI-3 Command Set Read Buffer Command (3CH) SE/Diff #: 0 = This SCSI bus is a differential bus; 1 = This SCSI bus is a single-ended bus. Current mode: The Addressing Mode last requested. Note: This may not be the addressing mode in use. Future mode: The future Addressing Mode to be attempted on reboot. # SCSI ports: 2 = 2 SCSI ports; 4 = 4 SCSI ports. Current ALPA requested: The ALPA last requested. Note: This may not be the ALPA currently in use. Future ALPA: The future ALPA to be used on reboot. Lock Mapping: 0 = Do not save over reboot the map log; 1 = Lock the mapping log over reboot. Port Type: 0 = Auto Sense port; 1 = N_Port. Trace Level: The trace level setting of the FC bridge. IMBTW: 0 = No Initiator mode Buffered Tape Writes; 1 = Initiator made Buffered Tape Write Enabled. FC LUNs: The number of FC LUNS to be used in 3rd party copy. Xcopy: 0 = The serverless backup licensing is disabled; 1 = The serverless backup licensing is enabled. Additional length: The additional length supported currently is set to 0. Chapter 2 2- 107