HP Surestore 80fx Adding 2 Drives to the C1150 Series Jukebox - C1154-90001 - Page 8

Installing the 2-Drive Upgrade Note There is 1 drive installed in each drive enclosure. To add 2 drives, you will install drive enclosures where the air baffle plate is currently installed. 1. Remove current drive cables from the interposer PCA. 2. Remove the air baffle plate. Refer to Figure 3 for the correct location of the plate and of the 3 screws that must be removed. (You will need to use 2 of these screws to add the drive enclosures.). Air Baffle Plate Drives Interposer PCA Figure 3: Location of the air baffle plate 3. Verify that DIP swtiches on the top of the new drives are set to OFF, which is in the forward posi- tion (toward the front of the drive.) Refer to Figure 4. 8