HP Tc4400 HP Compaq nc4400 Notebook PC - Maintenance and Service Guide - Page 144
Remove the Torx8 T8M2.0×5.0 screw, infrared board to the system board.
UPC - 883585078639
View all HP Tc4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Removal and Replacement Procedures 2. Release the ZIF connector to which the infrared board cable is connected and disconnect the cable 1 from the system board. 3. Remove the Torx8 T8M2.0×5.0 screw 2 that secures the infrared board to the system board. 4. Remove the infrared board 3. Removing the Infrared Board Reverse the above procedure to install the infrared board . 5-62 Maintenance and Service Guide
5–62
Maintenance and Service Guide
Removal and Replacement Procedures
2. Release the ZIF connector to which the infrared board cable
is connected and disconnect the cable
1
from the system
board.
3. Remove the Torx8 T8M2.0×5.0 screw
2
that secures the
infrared board to the system board.
4. Remove the infrared board
3
.
Removing the Infrared Board
Reverse the above procedure to install the infrared board .