HP Tx2-1370us HP TouchSmart tx2 Notebook PC - Maintenance and Service Guide - Page 46
straight up to remove it from the hard drive., Lift the bracket
UPC - 884962549247
View all HP Tx2-1370us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4. Remove the hard drive cover. NOTE: The hard drive cover is included in the Plastics Kit, spare part number 487926-001. 5. Grasp the Mylar tab (1) on the hard drive and lift the hard drive to disconnect it from the system board. 6. Remove the hard drive (2) from the hard drive bay. 7. If it is necessary to remove the hard drive bracket and connector, remove the two Phillips PM3.0×3.0 hard drive bracket screws (1) from each side of the hard drive. 8. Lift the bracket (2) straight up to remove it from the hard drive. 9. Remove the connector (3) from the hard drive. Reverse this procedure to reassemble and install the hard drive. 38 Chapter 4 Removal and replacement procedures
4.
Remove the hard drive cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 487926-001.
5.
Grasp the Mylar tab
(1)
on the hard drive and lift the hard drive to disconnect it from the
system board.
6.
Remove the hard drive
(2)
from the hard drive bay.
7.
If it is necessary to remove the hard drive bracket and connector, remove the two Phillips
PM3.0×3.0 hard drive bracket screws
(1)
from each side of the hard drive.
8.
Lift the bracket
(2)
straight up to remove it from the hard drive.
9.
Remove the connector
(3)
from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
38
Chapter 4
Removal and replacement procedures