HP Vectra XA 5/xxx HP Vectra VL 5/XXX sERIES 5 Pc DESKTOP USER’S GUID - Page 17
Connecting to a Network
View all HP Vectra XA 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
1 Setting Up and Using Your PC Connecting to a Network Connecting to a Network If your PC comes with a network connector, let your Network Administrator know you are connecting your PC to the network. Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector. To enable your network connection, refer to the Integrated Network Interface Submenu in the Configuration Menu of the HP Setup program. (You can find additional information in the online Network Administrator's Guide.) NOTE If you need a BNC Coax connector to connect to the network, you can install an optional BNC coax adapter (order HP D3979A). Refer to "Installing a BNC Coax Adapter", on page 38. English 5
English
5
1
Setting Up and Using Your PC
Connecting to a Network
Connecting to a Network
If your PC comes with a network connector, let your Network
Administrator know you are connecting your PC to the network.
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector.
To enable your network connection, refer to the Integrated Network
Interface Submenu in the Configuration Menu of the HP
Setup
program. (You can find additional information in the online
Network
Administrator’s Guide
.)
NOTE
If you need a BNC Coax connector to connect to the network, you can
install an optional BNC coax adapter (order HP D3979A). Refer to
"Installing a BNC Coax Adapter", on page 38.