HP Vectra XA 5/xxx HP Vectra XA 5/xxx, Familiarization guide - Page 12
Network Board
View all HP Vectra XA 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HP Vectra XA 5/xxx PC Network Board Network Board The Ethernet 10/100 BT PCI board is a proprietary PCI network board, with two network connectors. Remote start 10 BaseT RJ-45 UTP connector 100 BaseT RJ-45 UTP connector Connector 10 BT 100 BT Properties Configuration needs Remote power-on (RPO) and Remote wake-up (RWU) 10 Mbits per second operation Remote wake-up (RWU) 100 Mbits per second operation Must have cable plugged between the remote start connector on the network board and the external start connector on the system board. Power-on integrated network field set to Enabled. No requirements Suspend wake-up. Power-on integrated network field set to Enabled. External cable not needed No requirements If the user complains of poor network performance, check whether the 100 BaseT connector is being used on a 10 BaseT network. (Doing so causes the 100 BaseT connector to switch automatically to a back-up 10 BaseT mode of operation, but with many retries and the consequent poor performance.) 10