HP Vs15 HP Flat Panel Monitor - (English) vf52 Users Guide - Page 14

3 Press the 'Select' button to select and execute the Auto Setup function. After the execution of the Auto Setup function, it will show the follow message: Adjusting the "Management" Submenu To perform the adjustment in the "Management" submenu you should follow the steps below: 1 Press the 'Select' button to show the OSD "Main Menu". 2 Use the '+' or '-' button to move (forward or backward) to the management icon and highlight it. If the image looks correct, choose Yes. Or If the image requires further adjustment, choose No, and the 'Phase' bar will show. Then you can adjust Phase by using the '+' or '-' buttons. When all text appears focused and there is no instability in the image, press the 'Select' button to end the adjustment. 3 Press the 'Select' button to enter the "Management" Submenu. It will show four items for your further adjustment. If 'Brightness' is selected, you may use the '+' or '-' buttons to adjust the setting of brightness. The fullness of the graphic bar as well as the numerical value at the right corner is changed accordingly. 10 user's guide