HP Vs15 HP VF51 Flat Panel Display - (English) User's Guide - Page 19

Performing Auto Configuration in the OSD Menu, Configuring Colors

Get HP Vs15 - 15inch LCD Monitor PDF manuals and user guides
UPC - 829160547435
View all HP Vs15 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

1. Open the OSD Main Menu by pressing the Select button. 2. Press the Up (▲) or Down (▼) buttons to move forward or backward to the CLOCK (or PHASE) icon and highlight it. 3. Press the Select button to select it. This will open the CLOCK (or PHASE) bar with the associated numeric value for your adjustment onscreen. 4. Press the Up (▲) or Down (▼) buttons to adjust its value. The range for adjustment is from 0 to 100. The Up (▲) button will increase the numeric value of the setting and the Down (▼) button will decrease it. Tip: If Auto Configuration does not produce a clear image, try adjusting the PHASE setting. Performing Auto Configuration in the OSD Menu To perform auto adjustment in the OSD menu, follow the steps below: 1. Open the OSD Main Menu by pressing the Select button. 2. Press the Up (▲) or Down (▼) buttons to move forward or backward to the AUTO icon and highlight it. 3. Press the Select button to select it. This will open the AUTO CONFIG submenu and start the auto adjustment function. After the auto adjustment is complete, the OSD will close. Configuring Colors To configure the color settings for your preference, follows the steps below: 1. Open the OSD Main Menu by pressing the Select button. 2. Press the Up (▲) or Down (▼) buttons to move forward or backward to the COLOR icon and 15 MAIN PAGE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
1. Open the OSD
Main Menu
by pressing the
Select
button.
2. Press the
Up (
▲
)
or
Down (
▼
)
buttons to move forward or backward to the CLOCK (or PHASE)
icon and highlight it.
3. Press the
Select
button to select it. This will open the CLOCK (or PHASE) bar with the associated
numeric value for your adjustment onscreen.
4. Press the
Up (
▲
)
or
Down (
▼
)
buttons to adjust its value. The range for adjustment is from 0
to 100. The
Up (
▲
)
button will increase the numeric value of the setting and the
Down (
▼
)
button will decrease it.
Tip:
If Auto Configuration does not produce a clear image, try adjusting the PHASE setting.
Performing Auto Configuration in the OSD Menu
To perform auto adjustment in the OSD menu, follow the steps below:
1. Open the OSD
Main Menu
by pressing the
Select
button.
2. Press the
Up (
▲
)
or
Down (
▼
)
buttons to move forward or backward to the AUTO icon and
highlight it.
3. Press the
Select
button to select it. This will open the AUTO CONFIG submenu and start the
auto adjustment function.
After the auto adjustment is complete, the OSD will close.
Configuring Colors
To configure the color settings for your preference, follows the steps below:
1. Open the OSD
Main Menu
by pressing the
Select
button.
2. Press the
Up (
▲
)
or
Down (
▼
)
buttons to move forward or backward to the COLOR icon and
15
MAIN PAGE