HP Vs15 HP w15e LCD Monitor - Page 15

CAUTION, Installing the Monitor on a Swing Arm

Page 15 highlights

4. Insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor. Figure 3-6 Installing the Monitor on a Swing Arm CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required (not provided with the monitor). Longer screws should not be used because they may damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor. 5. Reconnect the cables to the monitor panel. Mounting the Monitor Panel 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

4.
Insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on
the monitor.
Figure 3-6
Installing the Monitor on a Swing Arm
CAUTION:
This monitor supports the VESA industry standard 100 mm mounting holes. To attach
a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are
required (not provided with the monitor). Longer screws should not be used because they may
damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant
with the VESA standard and is rated to support the weight of the monitor display panel. For best
performance, it is important to use the power and video cables provided with the monitor.
5.
Reconnect the cables to the monitor panel.
Mounting the Monitor Panel
9