HP Xw8200 Adaptec SCSI RAID 2120S: Installation Guide - Page 7
System Requirements, Storage Requirements for Drivers and Software, Motherboard Compatibility - motherboard drivers
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Adaptec SCSI RAID 2120S/2200S Installation Guide System Requirements The following system requirements are discussed: ■ Storage requirements for drivers and software ■ Motherboard compatibility ■ SCSI requirements Storage Requirements for Drivers and Software Adaptec storage management software and device drivers will require disk space of up to 20 MB. Note: This information is provided as a guide for allocating resources on your system. Space requirements may vary in subsequent releases. Allocate more room on your hard disk drive if in doubt. See page 1-13 for information about the meaning of Notes. A mouse and SVGA color monitor using a resolution of at least 800 x 600 with 16-bit color are also required. Motherboard Compatibility The Adaptec controller requires a motherboard BIOS that: ■ Complies with the PCI Local Bus Specification, Revision 2.2 and higher. ■ Supports multifunction devices where one of the devices is a PCI bridge. ■ Provides large memory-mapped address ranges. Refer to the Readme file on the Adaptec SCSI RAID Installation CD for information about motherboard compatibility and notable comments about some motherboards that Adaptec has tested with the Adaptec SCSI RAID controller. 1-2