HP Z3200 HP Designjet Z3200 Photo Printer Series - Quick Reference Guide [Engl - Page 13

the end of the roll., Put the blue paper stop onto the open end of the spindle, and push it towards - paper types

Get HP Z3200 - DesignJet Color Inkjet Printer PDF manuals and user guides
UPC - 884420403371
View all HP Z3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

3. If your roll has a three-inch cardboard core, ensure that the core adaptors supplied with the printer have been installed. 4. If the roll is long, rest the spindle horizontally on a table and load the roll on the table. TIP: You may need two people to handle a large roll. 5. Slide the new roll onto the spindle. Make sure the paper type is oriented as shown. If it is not, remove the roll, turn it 180 degrees and slide it back on to the spindle. There are labels on the spindle showing the correct orientation. NOTE: From the back of the printer, the blue stop is fitted onto the right-hand end of the spindle. Ensure both ends of the roll are as close to the spindle stops as possible. 6. Put the blue paper stop onto the open end of the spindle, and push it towards the end of the roll. Paper handling 7. Ensure the blue paper stop is pushed in as far as it goes, until both ends are against the stops. If you are a regular user of different paper types, you can change rolls more quickly if you preload rolls of different paper types on different spindles. Extra spindles are available for purchase, see Accessories on page 29. ENWW Load a roll onto the spindle 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
3.
If your roll has a three-inch cardboard core, ensure that the core adaptors
supplied with the printer have been installed.
4.
If the roll is long, rest the spindle horizontally on a table and load the roll on
the table.
TIP:
You may need two people to handle a large roll.
5.
Slide the new roll onto the spindle. Make sure the paper type is oriented as
shown. If it is not, remove the roll, turn it 180 degrees and slide it back on to
the spindle. There are labels on the spindle showing the correct orientation.
NOTE:
From the back of the printer, the blue stop is fitted onto the right-hand
end of the spindle.
Ensure both ends of the roll are as close to the spindle stops as possible.
6.
Put the blue paper stop onto the open end of the spindle, and push it towards
the end of the roll.
7.
Ensure the blue paper stop is pushed in as far as it goes, until both ends are
against the stops.
If you are a regular user of different paper types, you can change rolls more quickly
if you preload rolls of different paper types on different spindles. Extra spindles are
available for purchase, see
Accessories
on page
29
.
ENWW
Load a roll onto the spindle
9
Paper handling