HP Z820 LSI SAS RAID Host Bus Adapter installation - Page 1

HP Z820 Manual

Page 1 highlights

LSI SAS RAID Host Bus Adapter installation Introduction This document describes how to install an LSI 9212-4i Serial Attached SCSI (SAS) Redundant Array of Independent Disks (RAID) Host Bus Adapter (HBA) in HP Z series Workstations. Procedures are included for drives mounted in internal hard drive bays and external drive bays. Kit contents ● LSI SAS 9212-4i RAID HBA (RAID controller card) ● SAS driver CD ● 4x SATA cable extender (for HP Z620 Workstation only) ● Hard drive activity LED cable ● Warranty information ● Installation instructions (this document) Before you begin To view QuickSpecs and determine the compatibility of this product with your HP workstation, see http://www.hp.com/go/productbulletin. 405023-007 © 2012 Hewlett-Packard Development Company, L.P. Printed in the USA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

LSI SAS RAID Host Bus Adapter
installation
Introduction
This document describes how to install an LSI 9212–4i Serial Attached SCSI (SAS) Redundant Array of
Independent Disks (RAID) Host Bus Adapter (HBA) in HP Z series Workstations. Procedures are included
for drives mounted in internal hard drive bays and external drive bays.
Kit contents
LSI SAS 9212–4i RAID HBA (RAID controller card)
SAS driver CD
4x SATA cable extender (for HP Z620 Workstation only)
Hard drive activity LED cable
Warranty information
Installation instructions (this document)
Before you begin
To view
QuickSpecs
and determine the compatibility of this product with your HP workstation, see
go/productbulletin.

405023-007
© 2012 Hewlett-Packard Development Company, L.P. Printed in the USA