HP d260 Business Desktop d260 Series, Service Reference Guide, First Edition - Page 15
Computer, Setup, Heading, Option, Description - keyboard
View all HP d260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setup Utilities and Diagnostics Features Computer Setup Heading Option Post Delay Time (in seconds) System Keyboard Internal Graphic Mode Select Quick Power On Self Test Boot Other Device Boot Up NumLock Status Description Sets the amount of time before the setup Utility prompt (F10=setup) appears when the computer boots. • None: POST Delay Time disable (Default) • 5: POST Delay 5 seconds • 10: POST Delay 10 seconds • 15: POST Delay 15 seconds • 20: POST Delay 20 seconds Detects if a keyboard is present when the Computer boots. Absent: keyboard not detected (Default) Present: keyboard detected Selects the size of memory for internal graphic adapter. • 1MB: Share 1MB • 8MB: Share 8MB (Default) • 16MB: Share 16MB Enable this item to shorten the power on testing (POST) and have your system, start up faster. The available setting values are: Disabled and Enabled. With this function set to Enabled, the system will boot from some other devices if the first/second/third boot devices failed. This item defines if the keyboard Num Lock key is active when your system is started. Power management Add-On ROM Display mode ACPI Standby State setup Restore on AC/Power loss Resume on PME wake on alarm item Sets the ACPI Standby State when system goes into ACPI standby Mode. • S1/POS: Power on Suspend • S3/STR: Suspend to RAM(Default) Sets the system status after AC power loss. • Power off: system always powers Off (default) • Power on: system always powers • Last state: system returns to the last state before AC power loss. Sets the resume on PME from soft off • Disable: PME resume disable • Enable: PME resume enable (Default) Service Reference Guide, d260 377977-AA1 2-5