HP d260 Business Desktop d260 Series, Service Reference Guide, First Edition - Page 51
Removing a Diskette Drive, 7.4 Removing a 3.5 Hard Drive
View all HP d260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Removal and Replacement Procedures - Microtower Type Chassis 6.7.3 Removing a Diskette Drive 1. Prepare the computer for disassembly (Section 6.1). 2. Remove both the right and left access panels (Section 6.2). 3. Remove the front bezel (section 6.3). 4. Disconnect the power, and data cables from the back of the drive. 5. Remove the four screws, two from each side, that secure the drive in the drive cage 1. 6. Slide the drive out of the front of the chassis 2. To replace the diskette drive, reverse removal procedure. 6.7.4 Removing a 3.5" Hard Drive 1. Prepare the computer for disassembly (Section 6.1). 2. Remove both the right and left access panels (Section 6.2). 3. Remove the front bezel (section 6.3). 4. Disconnect the power, and data cables from the back of all installed 3.5" drives. 5. Remove the four screws, two from each side, that secure the drive in the drive cage 1. 6. Slide the drive out of the drive cage 2. Service Reference Guide, d260 377977-AA1 6-11