HP nw8240 Hardware and Software Guide - Page 231
Bootable Devices in Computer Setup, Advanced > Device Options > Enable USB legacy
View all HP nw8240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
MultiBoot Bootable Devices in Computer Setup The notebook can only start up from a USB device or the NIC if that device has been enabled for inclusion in MultiBoot. To enable a device or location for inclusion in MultiBoot: 1. Open Computer Setup by turning on or restarting the notebook. Press f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2. To enable bootable media in USB drives or in drives inserted into an optional docking device, use the arrow keys to select Advanced > Device Options > Enable USB legacy support. - or - To enable a NIC, select Security > Device Security > Internal network adapter boot. 3. Save your preferences and exit Computer Setup, by using the arrow keys to select File > Save Changes and Exit, and then follow the instructions on the screen. Your preferences are saved when you exit Computer Setup, and they take effect when the notebook restarts. ✎ To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL) server during startup without using MultiBoot, quickly press f12 when the Network Service Boot message appears in the lower-right corner of the screen. B-4 Hardware and Software Guide