HP t505 Administrator Guide 12 - Page 10

3 Command-line options See the following table for a list of command-line options for HPUSBPortMgr.exe, which is located in the System32 folder on 32-bit systems and in the SysWOW64 folder on 64-bit systems. After making changes using the command line, you must restart the thin client for changes to take effect. TIP: Options are not case sensitive. /USBStor-ReadOnly Sets access to USB mass storage devices as read-only. /USBF {Enable|Disable} Enables or disables access for all USB devices not enabled in the whitelist. /Add "VendorID=VendorID;ProductID=ProductID;ClassID=ClassID;Allow=HexValue;Name=String" Adds an item to the whitelist. /Delete "VendorID=VendorID;ProductID=ProductID;ClassID=ClassID;Allow=HexValue;Name=String" Removes an item from the whitelist. /Allow "VendorID=VendorID;ProductID=ProductID;ClassID=ClassID;Allow=HexValue;Name=String" Allows access for a whitelist item. /Block "VendorID=VendorID;ProductID=ProductID;ClassID=ClassID;Allow=HexValue;Name=String" Blocks access for a whitelist item. /Export FilePath Exports the HP USB Port Manager configuration to a PowerShell script. /Show Displays the current configuration information for HP USB Port Manager. /Help - or - /? Displays command-line help. Examples: /USBStor-ReadOnly Disable /USBF Enable HPUSBPortMgr.exe /Add "VendorID=0x0000;ProductID=0x0000;ClassID=0x09;Allow=0x01;Name=Hub" HPUSBPortMgr.exe /Block "VendorID=0x0000;ProductID=0x0000;ClassID=0x09;Allow=0x01;Name=Hub" HPUSBPortMgr.exe /Export C:\hpusbportmanager.ps1 4 Chapter 3 Command-line options