HP t5335 HP t5325/t5335 Thin Clients Hardware Reference Guide - Page 10
Installing the Rubber Feet,
View all HP t5335 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4 Installing the Rubber Feet To install the rubber feet: 1. Remove the feet from their backing. 2. Line up the hole in each foot with a VESA hole on the bottom of the thin client. Press the foot down firmly to secure it to the thin client. NOTE: The feet provide a protective cushion between the thin client and whatever surface it sits on or is mounted to. Figure 4-1 Installing the rubber feet 4 Chapter 4 Installing the Rubber Feet ENWW
4
Installing the Rubber Feet
To install the rubber feet:
1.
Remove the feet from their backing.
2.
Line up the hole in each foot with a VESA hole on the bottom of the thin client. Press the foot
down firmly to secure it to the thin client.
NOTE:
The feet provide a protective cushion between the thin client and whatever surface it
sits on or is mounted to.
Figure 4-1
Installing the rubber feet
4
Chapter 4
Installing the Rubber Feet
ENWW