HP t5500 AB300A Server Console Solution - Page 8

Configuring the AB300A as an RS-232 Console The following section describes how to create a terminal emulator session, how to create an auto log on user account, and how to configure the terminal emulator session to automatically launch when the thin client is rebooted for any reason. NOTE: There is currently no method of saving these configuration parameters to a file that can be retrieved at a later time. Therefore, it is imperative that all configuration parameters are recorded for future use. Creating a Terminal Emulator Session To create a terminal emulator session, perform the following steps: 1. Connect the HP Compaq Thin Client T5500 unit using the supplied DB9 Serial Cable (5184-1894) to the serial port of the HP9000 server. 2. Select Start > HP Connection Window. 3. From the HP Connection Window, run the New Terminal Emulation wizard. 4. Create a Connection Name for this session. NOTE: Please note that the console solution supports two of the available teemCE emulations: VT 100 and HP 700-92/96. 5. If using the HP700-92/96 emulation mode, click the Emulation dropdown list to select the HP700-92/96 emulation mode. Click the Terminal ID dropdown list to select 70092 and click Next. 8 AB300A Console User Guide HP CONFIDENTIAL Codename: Part Number: AB300-90001 Last Saved On: 2/10/04 2:39 PM