Hitachi CMP4121HDU Owners Guide - Page 27

OTHER FEATURES Automatic Store Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Menu Display Registration condition PICTURE SOUND DISPLAY FUNCTION OTHER OPERATE MODE VIDEO LEVEL 3D COMB VOLUME BALANCE TREBLE BASS MUTE LEVEL SIDE AREA RGB1 SIGNAL RGB2 SIGNAL COMPONENT1 COMPONENT2 COMPONENT (VIDEO2) COLOR SYSTEM AUTO DISPLAY LANGUAGE ID NO. ORBITER MOVING TIMER INVERSE WHITE Can register 1 group. PICTURE DISPLAY CONTRAST BRIGHTNESS COLOR TINT GAMMA COLOR TEMP. CONTRAST MODE FILM MODE DISPLAY SIZE Can register for every input function. Menu Display Registration condition PICTURE SHARPNESS VIDEO PICTURE BLACK STRETCH LTI CTI YNR CNR Can register for every input function in a video signal input. DISPLAY V.POSITION H.POSITION CLOCK PHASE PICTURE DISPLAY FUNCTION ENHANCER FILTER MODE WIDE MODE RGB1 SIGNAL RGB2 SIGNAL COMPONENT1 COMPONENT2 Can register 1 group every signal mode. Can register settings every RGB1, RGB2 input (RGB mode). PICTURE R-GAIN G-GAIN B-GAIN Can register settings every RGB functions and video functions. : When the optional video unit has been inserted. • The previously recorded items will be lost. • The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the elements are the same or similar will be handled as the same signal. Signal Check Changes in the signal status are displayed on the screen as they arise. Status Display When AUTO DISPLAY is set to ON, the input signal is switched or when the RECALL button is pressed. A guide is displayed for the input terminal and the horizontal and vertical sync frequency. Action When the sync signal is no longer detected. • A guide displays NO SYNC SIGNAL, and POWER SAVE (for approx. 5 sec.) • When the condition continues where the sync signal cannot be detected, indicator lamp of power source changes in orange and the mode switches to power save mode. Recheck the personal computer power switch status and the connection status. When the input signal does not match the monitor specifications or is in an unstable status. A guide displays OUT OF FREQUENCY. Recheck the input signal specifications.  ʙ   3(# RGB1 [RGB] H : 46.5kHz V : 60Hz VIDEO ʢThis function can only be used when the optional video unit has been inserted.ʣ VIDEO2 [COMPONENT] POWER SAVE OUT OF FREQUENCY