Home » Hitachi Manuals » Projectors » Hitachi CPX605 » Manual Viewer

Hitachi CPX605 User Manual

Hitachi CPX605 - 4000 Lumens XGA LCD Projector Manual

UPC - 050585150980

View all Hitachi CPX605 manuals

Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX605 manual content summary:

Hitachi CPX605 | User Manual - Page 1
Projector CP-X505/CP-X605 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future
Hitachi CPX605 | User Manual - Page 2
this manual 1 (EASY MENU continued) Content 2 Language, Go to Advanced Menu... Projector features 61 Correcting the keystone distortions. 20 Troubleshooting 62 Using the magnify feature 21 defects. . 65 EASY MENU 24 Warranty and after-service. . . . 68 Aspect, Auto keystone execute,
Hitachi CPX605 | User Manual - Page 3
image from even a short distance. Preparations Contents of package Please see the "Contents of package" in the "User's Manual (concise)" which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything is missing. NOTE • Keep the original packing
Hitachi CPX605 | User Manual - Page 4
. ►Do not grab the front cover to hold the projector up, since the projector may drop down. ►Do not handle the elevator knobs without holding the projector, since the projector may drop down. CAUTION ►Maintain normal ventilation to prevent the projector from heating up. Do not cover, block or plug
Hitachi CPX605 | User Manual - Page 5
) (16) (12) (5) (4) (3) CAUTION ►Do not use the security bar and the security slot to prevent the projector from falling down, since it is not designed for it. ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the
Hitachi CPX605 | User Manual - Page 6
Part names Remote control (7) (1) Laser pointer (13) It is a beam outlet. (4) (2) LASER INDICATOR (13) (3) LASER button (13) (4) STANDBY/ON button (16) (17) (5) VOLUME button (17) (6) MUTE button (17) (26) (7) VIDEO button (18) (8) RGB button (17) (11) (9) SEARCH button (18)
Hitachi CPX605 | User Manual - Page 7
into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom. ►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the
Hitachi CPX605 | User Manual - Page 8
(b) (a) (c) up (c) down Suspended from the ceiling (c) up (a) (c) down (b) • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. (a) Screen size [inch
Hitachi CPX605 | User Manual - Page 9
lock the elevator feet. 4. After making sure that the elevator feet are locked, put the projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. To loose an elevator foot, pull up the elevator knob on
Hitachi CPX605 | User Manual - Page 10
devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices VIDEO OUT R L AUDIO IN OUT VCR/DVD player WARNING ►Do not disassemble or modify the projector. ►Be careful not to damage the cables, and do not use damaged cables. CAUTION ►
Hitachi CPX605 | User Manual - Page 11
with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the
Hitachi CPX605 | User Manual - Page 12
Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug
Hitachi CPX605 | User Manual - Page 13
rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION ►Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Putting batteries
Hitachi CPX605 | User Manual - Page 14
. If the remote control does not function properly, attempt to change the signal frequency. Please remember that the "REMOTE FREQ." in SERVICE item of OPTION menu (46) of the projector to be controlled should be set to the same mode as the remote control. To set the mode of the remote control
Hitachi CPX605 | User Manual - Page 15
simple PC mouse & keyboard The accessory remote control works as a simple mouse and keyboard of the PC, when an M1-D/USB cable connects this projector's M1-D port with the PC's DVI-D and USB (A type) ports. (1) Mouse left button LAN Pushing the button into the center point works instead of
Hitachi CPX605 | User Manual - Page 16
green. (2) When AUTO ON in the OPTION menu is set to TURN OFF (42): Please see step 3. 3. Press the STANDBY/ON button on the projector or the remote control. To display the picture, select an input signal according to the section "Selecting an input signal" (18). POWER indicator POWER (Steady
Hitachi CPX605 | User Manual - Page 17
/BR)   1. Press the RGB button on the remote control to select an input port for the RGB signal. Each time you press the button, the projector switches its RGB input port as below. RGB 1  RGB 2  M1-D LASER INDICATOR STANDBY/ON VIDEO RGB BLANK LASER ● If the RGB button is pushed (when
Hitachi CPX605 | User Manual - Page 18
input signal (continued) 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below. COMPONENT (Y, CB/RB, CR/BR)  S-VIDEO  VIDEO LASER INDICATOR STANDBY/ON VIDEO BLANK RGB LASER BLANK
Hitachi CPX605 | User Manual - Page 19
Adjusting the zoom and focus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Adjusting the lens shift 2/5 1. Use the vertical lens shift dial to shift the picture upward or downward. 2. Use the horizontal lens shift dial to shift the picture left or
Hitachi CPX605 | User Manual - Page 20
07#. 2. Use the cursor buttons ▲/▼ to select AUTO or MANUAL operation, and press the button ► to perform the following. ESC MENU H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. ●
Hitachi CPX605 | User Manual - Page 21
ON is selected to the MESSAGE item of SCREEN menu (41)), and the projector will go into the FREEZE mode. ESC MENU RESET POSITION AUTO MAGNIFY ON BUTTON is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave
Hitachi CPX605 | User Manual - Page 22
from the blank screen and return to the input signal screen, press the BLANK button again. ● The projector automatically returns to the input signal screen wheAnSPECoT ne of the projector's buttons or the remote control buttons is pressed or one PUSHENTER of the commands (except get commands) is
Hitachi CPX605 | User Manual - Page 23
MENU, select the EASY MENU. Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to select want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control. 5. Press
Hitachi CPX605 | User Manual - Page 24
the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. '#5;/'07=4)$? #52'%6 #761-';5610' -';5610' -';5610' ':'%76' 2+%674'/1&' $4+)*60'55
Hitachi CPX605 | User Manual - Page 25
EASY Menu (continued) EASY Menu Item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu... Description Using the ◄/► buttons adjusts the brightness. See the BRIGHTNESS item in PICTURE menu (26). Using the ◄/► buttons adjusts the contrast. See
Hitachi CPX605 | User Manual - Page 26
Select an item using the ▲/▼ cursor buttons on the +0276 5'672 7.6 %1.146'/2/+& projector or remote control, and press the ► cursor button #7&+1 5%4''0 %1.14 6+06 on the projector or remote control, or the ENTER button 126+10 0'6914- 5*#420'55 6+8'+4+56740
Hitachi CPX605 | User Manual - Page 27
PICTURE Menu (continued) PICTURE Menu Item Description Using the ▲/▼ buttons switches the color temperature mode. HIGH DEFAULT � HIGH CUSTOM � MID DEFAULT � MID CUSTOM LOW DEFAULT � LOW CUSTOM � Hi-BRIGHT-1 DEFAULT � Hi-BRIGHT-1 CUSTOM Hi-BRIGHT-2 DEFAULT � Hi-BRIGHT-2 CUSTOM To adjust CUSTOM
Hitachi CPX605 | User Manual - Page 28
iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER
Hitachi CPX605 | User Manual - Page 29
IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the
Hitachi CPX605 | User Manual - Page 30
IMAGE Menu IMAGE Menu (continued) Item H PHASE H SIZE AUTO ADJUST EXECUTE Description Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for an RGB signal or a component video signal. (except 525i (480i), 625i (576i), SCART RGB)
Hitachi CPX605 | User Manual - Page 31
INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the
Hitachi CPX605 | User Manual - Page 32
/Pr) and VIDEO ports will function as a SCART RGB port. ALAN SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer. RGB OUT RGB1 RGB2 M1-D AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL
Hitachi CPX605 | User Manual - Page 33
INPUT Menu (continued) INPUT Menu Item FRAME LOCK RGB IN Description Using the ▲/▼ buttons turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are
Hitachi CPX605 | User Manual - Page 34
INPUT Menu INPUT Menu (continued) Item RESOLUTION Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. 4'51.76+10 (2) In
Hitachi CPX605 | User Manual - Page 35
to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the Menu. When the slant of the projector is changed, executes this function again. • The adjustable range of this function will vary among inputs. For some input, this function may not work
Hitachi CPX605 | User Manual - Page 36
. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off. 36
Hitachi CPX605 | User Manual - Page 37
AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the
Hitachi CPX605 | User Manual - Page 38
SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the
Hitachi CPX605 | User Manual - Page 39
SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen
Hitachi CPX605 | User Manual - Page 40
SCREEN Menu SCREEN Menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this
Hitachi CPX605 | User Manual - Page 41
When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (21). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. 5174%'0#/' The
Hitachi CPX605 | User Manual - Page 42
cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. RGB 1  RGB 2  M1-D  COMPONENT  S-VIDEO  VIDEO AUTO KEYSTONE Using the ▲/▼ buttons turns on/off the automatic
Hitachi CPX605 | User Manual - Page 43
or the remote control buttons is pressed or one of the commands (except get commands) is transmitted to the control port during the corresponding time, projector will not be turned off. Please refer to the section "Turning off the power" (16). LAMP TIME FILTER TIME The lamp time is the time
Hitachi CPX605 | User Manual - Page 44
Set the volume up. • VOLUME-: Set the volume down. Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER use at highlands etc. Note that the projector is noisier when the HIGH is selected. HIGH ó NORMAL (#052''& *+)* 014/#. (continued
Hitachi CPX605 | User Manual - Page 45
as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not manually. GHOST 1. Select a color element of ghost using the ◄/► buttons. 2. Adjust the selected element using the ▲/▼ buttons to disappear ghost. 4)$ )*156 SERVICE
Hitachi CPX605 | User Manual - Page 46
OPTION Menu OPTION Menu (continued) Item SERVICE Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching
Hitachi CPX605 | User Manual - Page 47
please make note of the PASSWORD during this time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX. • Please do not forget your PASSWORD. (continued on next page) 5'%74+6; 0'92#55914&#)#+0 %#0%'. 1- NEW PASSWORD
Hitachi CPX605 | User Manual - Page 48
is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code will be displayed. NOTE: If there is no key input for about 55 seconds while the Inquiring
Hitachi CPX605 | User Manual - Page 49
, please make note of the PASSWORD during this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to '06'4 ':+6 PASSWORD BOX MyScreen PASS WORD on/off menu. When a PASSWORD is set for MyScreen: • The MyScreen registration function
Hitachi CPX605 | User Manual - Page 50
also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed. This function will activate only when the projector is started after the power switch was turned off. • Please do not forget your PIN Code. 3.2 Turning Off the PIN LOCK Function 3.2-1 Follow the procedure
Hitachi CPX605 | User Manual - Page 51
. Select TURN ON and the current 674010 67401(( angle and mirror setting will be recorded. NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected. Transition Detector on/off menu 4.1-2 If this function is set to TURN ON when the
Hitachi CPX605 | User Manual - Page 52
OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu. 4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will
Hitachi CPX605 | User Manual - Page 53
network settings 2+%674' &*%2 674010 on this projector may cause trouble on the network. +/#)' +0276 +2#&&4'55 57 if your network has DHCP enabled. ( User's Manual - Network Functions) • If you are not utilizing SNTP ( User's Manual - Network Functions), then you must set the
Hitachi CPX605 | User Manual - Page 54
and retrieve DATE AND TIME information from the Timeserver when SNTP is enabled. See [Date/ Time Settings] in [User's Manual - Network Functions: Configuring and Controlling the Projector via a Web Browser] for SNTP settings. e-SHOT display : Use the ▲/▼ buttons to select an item and the ► or ENTER
Hitachi CPX605 | User Manual - Page 55
DATE AND TIME have been set correctly. Replace the battery by following the instructions on replacing the battery. (60) Choose the RESTART using the ► button. 5'48+%' 4'56#46 Then use the ▲ button to execute. SERVICE 4'56#46 ':'%76' %#0%'. Network will be once cut off when choose restart. If
Hitachi CPX605 | User Manual - Page 56
to lock it in place. 6. Slide the lamp cover back in place and firmly fasten the screw of the lamp cover. The handles 7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu (43). (1) Press the MENU button to display a menu. (2) Point at
Hitachi CPX605 | User Manual - Page 57
org (in the US) or www.epsc.ca (in Canada). For more information, call your dealer. • If • Do not open the lamp cover while the projector is suspended from the ceiling. This is dangerous, problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative
Hitachi CPX605 | User Manual - Page 58
while lifting it. The filter unit made up the filter cover and others will come off. 4. Use a vacuum cleaner for the filter vent of the projector and the filter frame side of the filter unit. If the air filter is damaged or too soiled, replace it according to the following procedure
Hitachi CPX605 | User Manual - Page 59
filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector. NOTE • Please replace the air filter when it is damaged or too soiled, and also when you replace the lamp. • When you replace the
Hitachi CPX605 | User Manual - Page 60
Metal claw 5. Put a new battery in. Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may , so be careful not to lose it. 4. Turn the projector over once more, so that the bottom faces up, and Manual-Network Functions: Date/Time Settings for more information.) 60
Hitachi CPX605 | User Manual - Page 61
. CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard
Hitachi CPX605 | User Manual - Page 62
Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions projector or the signal of the SERVICE item in of this manual FILTER MAINTENANCE
Hitachi CPX605 | User Manual - Page 63
the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is
Hitachi CPX605 | User Manual - Page 64
indication is displayed after the remedy, please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. Lighting In Green Simultaneous blinking "Power ON" schedule is saved to the projector. (Please refer to the User's Manual-Network Functions: Schedule Settings for more information.)
Hitachi CPX605 | User Manual - Page 65
projector cool down enough. 3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (46) to reset all settings to factory default. Then, if the problem device by referring to the - outputted. manual of the source device. The input changeover
Hitachi CPX605 | User Manual - Page 66
Troubleshooting Phenomena that may be easy to be mistaken for machine defects ( Adjust BRIGHTNESS to a higher level using the menu function or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using
Hitachi CPX605 | User Manual - Page 67
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) lens". The exhaust ventilation holes at front is blocked by some objects. Remove any objects from front side of the projector. Reference page 24, 25, 26 25, 36 56, 57 19, 30 61 4 NOTE • Although bright spots
Hitachi CPX605 | User Manual - Page 68
Service / Specification Warranty and after-service If a problem occurs with the equipment, first refer to the "Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service Specification Liquid crystal projector 2.0 cm (0.79
Hitachi CPX605 | User Manual - Page 69
Specifications (continued) Specifications 319 154 139 418 [unit: mm] 69