Hitachi G23SR Instruction Manual - Page 14
Depressed Center Wheel Assembly And Disassembly, Warning - disc grinder
View all Hitachi G23SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English CAUTION: ● The revolving depressed center wheel will create air turbulence. Do no lay the grinder down in areas of dust or dirt until it has come to a complete stop. DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY WARNING: Never attempt to assemble or disassemble the depressed center wheel, unless the power switch is in the "OFF" position and the electrical cord has been disconnected from the receptacle. 1. Assembly (1) Turn the disc grinder upsidedown so that the spindle is facing upward. (2) Align the oval-shaped indentation of the wheel washer with the notched part of the spindle, then attach them. (3) Fit the protuberance of the depressed center wheel onto the wheel washer. (4) Screw the wheel nut onto the spindle. (5) While pushing the push button with one hand, lock the spindle by turning Wrench the depressed center wheel slowly with the other hand. Tighten the wheel nut by using the Wheel nut Tighten supplied wrench as shown in Fig. 5. CAUTION: ● Tighten the wheel nut securely and confirm that the depressed center wheel does not wobble. Depressed center wheel Wheel washer 2. Disassembly To remove the depressed center wheel, simply reverse the above-mentioned procedure. Wheel guard Spindle Fig. 5 Push button 14