Hitachi X1250 User Manual - Page 26
PICTURE-2 Menu
UPC - 050585150638
View all Hitachi X1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Multifunctional Settings (continued) PICTURE-2 Menu MENU MAIN V POSITION 20 PICTURE-1 H POSITION 142 PICTURE-2 H PHASE 31 With the PICTURE-2 menu, the items shown in the table below can INPUT AUTO H SIZE OVER SCAN 1344 95 be performed. Perform each operation in accordance with the SCREEN OPTION RESET instructions in the table below. NETWORK : SELECT memo This menu cannot be selected at a M1-D signal. Item V POSITION H POSITION V POSITION H SIZE OVER SCAN RESET Description Adjust the vertical position using the / buttons. : Up Down memo This item can be selected only at a RGB signal. Adjust the horizontal position using the / buttons. : Left Right memo This item can be selected only at a RGB signal. Adjust the horizontal phase to eliminate flicker using the / buttons. : Right Left memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i/625i/SCART RGB. Adjust the horizontal size using the / buttons. : Large Small memo This item can be selected only at a RGB signal. memo When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button during this operation. Adjust the over-scan ratio using the / buttons. : Small Large memo This item can be selected only at a video signal. memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Select the EXECUTE using the button to reset the PICTURE-2 menu items. : EXECUTE CANCEL The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the item "H PHASE" is not reset. 26