Hitachi X1250 User Manual - Page 32

Multifunctional Settings (continued) SCREEN Menu (continued) Item MESSAGE RESET Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the "AUTO IN PROGRESS" for the auto adjustment. The message of the "NO INPUT IS DETECTED" The message of the "SYNC IS OUT OF RANGE" The message of the "Searching ..." The message of the "Detecting ..." The indication of the input signal by input change. The indication of the aspect ratio by changing the aspect ratio. The indication of "FOCUS" by adjusting the focus. Select the EXECUTE using the button to reset the SCREEN menu items. : EXECUTE CANCEL The items of the SCREEN menu are collectively returned to the initial setting. How to register your picture as the MyScreen MyScreen is pointed on the SCREEN menu. Press the button MyScreen Do you start capturing this picture? The MyScreen menu appears. Do you capture the picture from the current screen? ESC :NO ENT :YES NO: Press the ESC/RESET button If the ESC/RESET button is pressed ... YES: Press the ENTER button The picture freeze and the frame for capturing appears. Move the frame to the position of the picture which you want to use, using / / / buttons, and press the ENTER button to register. MyScreen Move the capture area as you want. ESC :RETURN ENT :NEXT Registering. My Screen It takes about 1 minute to register. 45% Just when the picture registration is completed the registered screen and the message of the right is displayed for a few seconds. If the picture registration failed, the message of the right is displayed for a few seconds. 32 MyScreen registration is finished. A capturing error has occurred. Please try again.