Homelite UT80993A User Manual - Page 11

FEATURES PRODUCT SPECIFICATIONS Engine...Honda GCV160 Fuel Tank Capacity...0.25 gal. Maximum Pounds Per Square Inch Pressure*...2,700 psi Maximum Gallons Per Minute*...2.3 gpm Maximum Inlet Water Temperature...104˚F *Max. rating determined by PWMA Standard 101 KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. AUTOMATIC DETERGENT INJECTION SYSTEM Pour pressure washer detergent into the detergent tank to apply detergent quickly and easily to your cleaning project. Use of the soap nozzle will activate the detergent injector at a 20:1 dilution ratio. FUEL TANK This fuel tank has a maximum capacity of 0.29 gal. Use unleaded automotive gasoline in the engine. HONDA GCV160 ENGINE This Honda engine enables the pressure washer to achieve 2,700 psi (pounds per square inch) at a rate of 2.3 gpm (gallons per minute). Please read the engine manual included with this product. HOSE STORAGE Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place. ON/OFF SWITCH The on/off switch is used in combination with the recoil starter to start the engine. It is also used to turn the engine off. RECOIL STARTER The recoil starter is pulled to start the machine. SOAP NOZZLE The blue soap nozzle is used to apply detergent at low pressure only. SPARK ARRESTOR This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance. THERMAL RELIEF VALVE This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water from a rubber hose. Once the water has drained, the thermal relief valve will reset itself. NOTE: If the pressure washer is sitting on grass when the thermal release valve releases hot water, burn spots on the grass may occur. TRIGGER HANDLE The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. TRIGGER WITH LOCK OUT Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use. Page 7 - English