Honeywell 2020-5B User Guide - Page 67
Good Read Delay, User-Specified Good Read Delay, Image Scanner Trigger Modes, Manual/Serial Trigger
View all Honeywell 2020-5B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Good Read Delay This sets the minimum amount of time before the image scanner can read another bar code. Default = 0 ms (No Delay.) * No Delay Short Delay (500 ms) Medium Delay (1000 ms) Long Delay (1500 ms) User-Specified Good Read Delay If you want to set your own length for the good read delay, scan the bar code below, then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside back cover, then scanning Save. User-Specified Good Read Delay Image Scanner Trigger Modes Manual/Serial Trigger, Low Power You can activate the image scanner either by pressing the trigger, or using a serial trigger command (see "Trigger Commands" on page 10-4). When in manual trigger mode, the image scanner scans until a bar code is read, or until the trigger is released. When in serial mode, the image scanner scans until a bar code has been read or until the deactivate command is sent. In serial mode, the image scanner can also be set to turn itself off after a specified time has elapsed (see Read TimeOut (Serial Trigger Mode), which follows). * Manual/Serial Trigger 3 - 3