Honeywell 2020-5B User Guide - Page 78
No Read, Video Reverse
View all Honeywell 2020-5B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
No Read With No Read turned On, the image scanner sends an "NR" to the host if you pull and release the trigger without reading a code (e.g., bad bar code). If No Read is turned Off, the "NR" will not be sent to the host. No Read On * No Read Off If you want a different notation than "NR," for example, "Error," or "Bad Code," you can edit the output message using the Data Formatter (page 5-4). The hex code for the No Read symbol is 9C. Video Reverse Video Reverse is used to allow the image scanner to read bar codes that are inverted. The "Off" bar code below is an example of this type of bar code. Note: If additional menuing is required, Video Reverse must be disabled to read the menu bar codes and then re-enabled after menuing is completed. Video Reverse On * Video Reverse Off 3 - 14