Honeywell CT2400 Owner's Manual - Page 5
Personal Programming Chart
View all Honeywell CT2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
sleeping. (Again, lower heat or higher cool. For more comfortable sleeping, some people choose not to raise the cool temperature during the night.) You will set one schedule for weekdays and another for weekends, because your requirements will probably be different for each. During weekends, only the "WAKE and "SLEEP time periods are available. Fill in the times and temperatures you desire for weekdays and weekends. If you decide not to program the thermostat, it will automatically control heating at 68° F [20° C], and cooling at 78° F [26° C], 24 hours a day. Also, you do not need to enter a time and temperature program for all periods if your schedule does not require it. For example, a house that is occupied during weekdays would only require programs for "WAKE and "SLEEP." If no program is entered for the weekends, the thermostat will operate on the weekday "SLEEP program all weekend. When pressing the keys, use the ball of your finger or a soft pencil eraser. Use of sharp fingernails or pencil points can damage the keypad. If you make an error at any time during programming, just press the RUN PROGRAM key, and continue again at the step where you left off. 9 Personal Programming Chart Weekdays WAKE LEAVE RETURN SLEEP Weekends Ai WAKE SLEEP HEATING PROGRAM Start Time A Heating Temperature ~ If you decide not to enter weekend programs, SLEEP from the weekday program will copy to the weekend schedule. ~ The temperatures cannot be set any higher than 88° F [31° C] or any lower than 45° F [7: C]. 10.- .- - Weekdays WAKE LEAVE RETURN SLEEP COOLING PROGRAM Start Time Cooling Temperature~ Weekends ~ WAKE SLEEP ~ If you decide not to enter weekend programs, SLEEP from the weekday program will copy to the weekend schedule. ~ The temperatures cannot be set any higher than 88° F [31 0 C] or any lower than 45° F [7° C]. NOTE: If you decide not to program the thermostat, it will automatically control heating at 68° F [20° C], and cooling at 78° F [26° C], 24 hours a day. 11