Honeywell CT3600 Owner's Manual - Page 16

NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30. ❑ Press or until the desired wake temperature displays. The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling. ❑ Press Heat/Cool Settings to switch between setpoints. NOTE: Program times are the same for heating and cooling. ❑ Press or until the display shows the desired temperature setpoint. ❑ Press , or Leave Return Sleep and repeat these steps for each program period. The First Day is now programmed. ❑ Repeat each step in Program the First Day for the rest of the week. NOTE: After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day. ❑ Press Run Program when the entire week is programmed. Copy a Day Your thermostat can copy program settings from one day to another. ❑ Press Wake , , Leave Return or Sleep to enter programming mode. ❑ Press Day until the display shows the day you want to copy. ❑ Press Copy . The display shows. Mon M13327 69-1642 16