Honeywell CT3600 Owner's Manual - Page 17

❑ Press Day until the display shows the day you want to copy to. Mon Wed ❑ Press Copy to accept the change. ❑ Repeat these steps for each day you want to copy. NOTE: donE appears for two seconds and then the normal program display appears. Clear a Program Period NOTE: Wake cannot be cleared. M13328 M13329 ❑ Press , , or Leave Return Sleep for the program period you want to clear. ❑ Press Day until the desired day displays. ❑ Press and hold the , , or Leave Return Sleep for approximately 3 seconds until the time and temperature clear. ❑ Repeat the above steps for each period to be cleared. ❑ Press Run Program . STEP 11. OPERATING YOUR THERMOSTAT Change Temperature Setting Until the Next Program Period (Temporary Change) ❑ Press or until the screen shows the desired temperature setting. NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is displayed. Temporary appears in the display. The setting cancels when the next program period starts or when you press Run Program . 17 69-1642