Honeywell W8735B Owner's Manual - Page 20

Programming Dial-Out Telephone Number Settings The Telephone Access Module stores up to three dialout telephone numbers. Each telephone number can be a maximum of 25 digits in length. See Table 4. • Telephone number setting one: The homeowner selects a number where they can be contacted when away from home (such as office, second home, or cellular phone number). • Telephone number setting two: An alternate contact when the homeowner cannot be reached (such as relative, friend or neighbor). • Telephone number setting three (HVAC contractor is providing monitoring service at homeowner's request): The HVAC contractor phone number. IMPORTANT If these numbers are not programmed, a dialout is not initiated on alert. After you enter the configuration number 9, you will hear: • "Telephone Number Setting Menu." • "To change telephone number one, press 1." • "To change telephone number two, press 2." • "To change telephone number one, press 3." • "To return to the configuration menu, press the * key"." As an example, follow the process to change telephone number 1: 1. Press 1. 2. You will hear, "Telephone number one is not pro- grammed, enter the telephone number followed by the # key." 3. Enter the telephone number you wish to designate the Telephone Access Module to dial-out on an alert condition for telephone setting number one. 4. Press the # key. 5. You will hear, "For Voice, press 1; for Data, press 2." The Telephone Access module has the built-in capability to send data; this is considered a future application. Do not select option 2. Please fill out and mail your Registration Card so you are registered to receive information on this and other future capabilities and enhancements. IMPORTANT: Do not select option 2. You will not receive the alerts in a voice format so you cannot respond immediately to an alert. 6. Press 1. 7. You will hear, "The alert setting is voice." "Tele- phone number one is (telephone number you entered). 8. Follow steps 1-7 to program telephone numbers 2 and 3. 9. When complete, press the * key to return to the configuration menu. 69-1353 20