Hoover BH50015 Manual - Page 5

3. MAINTENANCE WARNING: Remove battery before performing service or maintenance. Dirt Cup & Filter Removal & Replacement IMPORTANT: For best results, clean after each use. REGULAR MAINTENANCE: Each time the dirt cup is emptied, the filter should be cleaned. (Filter will be discolored after use. This will not affect the filter's performance.) Removal 3.1 3.2 3.3 Grip dirt cup and twist off in direction indicated on hand vac until unlock symbol is aligned with mark. 3.4 Pull pre-screen from dirt cup. Empty dirt cup over trash can to remove debris. Pull out filter and brush or wash clean with cold water. WARNING: Always dry for 24 hours before replacing. WARNING: Do not use detergent or hot water to clean. 3.5 For filter replacement, please call 1-800-944-9200 or visit our website at www.hoover.com to locate a dealer nearest you. Filter Service Part #001331007. Replacement 3.6 Micro-layer side 3.7 To remove debris from prescreen, gently tap over trash. 3.8 Replace filter in pre-screen with micro-layer side facing out. Replace filter and pre-screen in dirt cup. Cleaning LiNXTM Power Head* *Available on BH50030 Hand Vac with Pet Tools. 3.9 3.10 Replace dirt cup by twisting on in direction indicated on hand vac until lock symbol is aligned with mark. 3.11 Remove LiNX™ Power Head Tool from nozzle and turn over. Press eject button on side of tool to release brushroll and remove. Remove red end cap and clean away hair and debris. IMPORTANT: Do not discard red end cap. Ensure red end cap is replaced. Place opposite end onto hexagonal drive gear and pivot into place until brushroll snaps secure.