Hotpoint HDA3500NBB Installation Instructions - Page 11

Dishwasher Installation STEP 13: FASTEN DISHWASHER TO UNDERSIDE OF COUNTERTOP OR SIDES OF CABINET In this step Uou will need the two 5/8" Phillips head wood screws set aside in Step 1. I M PORTANT - Dishwasher must be centered in cabinet opening. Interference with cabinets or countertop will cause leaks and damage to the door panel and/or control panel. • If countertop is wood or woodlike material, fasten the dishwasher to the countertop by driving the Phillips head screws through the countertop brackets and into the countertop. • If the countertop is granite or similar material, drive Phillips screws through side mount brackets and into the adjacent cabinets. • Make sure screws are driven straight and flush to prevent interference with door operation and damage to the control panel. See Figure T. STEP 14: CONNECT WATER SUPPLY Connect the water supply line to the 90° elbow installed in Step 6. • Slide the compression nut and then the ferrule over end of the water line. • Insert the water line into the 90 ° elbow. • Slide the ferrule against the elbow and secure with the compression nut. Hot Water SupplU Line C untert p Bracket Side M unt Brackets( pti nal) Figure T Tip: Avoid unnecessary service charges for leaks or control panel damage. Make sure the dishwasher is centered in the cabinet and the door opens and closes freely without hitting the adjacent cabinets. Drive mounting screws straight and flush. Figure U IM PORTANT - Check to be sure the door spring does not rub or contact the fill hose or water supplg line. Test bg opening and closing the door. Re-route the water supplg lines or slightlg bend the water valve bracket if a rubbing noise or interference occurs. Tip: Avoid unnecessarg service charges for noise or leaks Make sure the door spring does not rub against the fill hose or water supplu line. 11