Hotpoint RB757WHWW User Guide - Page 32

Safety Instructions Operating Instructions Care and Cleaning ge.com Oven Vent On glass cooktop models, the oven is vented through an opening at the rear of the cooktop. On coil cooktop models, the oven is vented through an opening under the right rear surface unit. Never cover the opening with aluminum foil or any other material. Painted Surfaces (on some models) Painted surfaces include the sides of the range and the sides of the door trim. To clean the painted surfaces, use a hot, damp cloth with a mild detergent suitable for these surfaces. Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth. Do not use steel-wood pads, commercial oven cleaners, cleaning powders or other abrasive cleaners. They will damage the surface. Stainless Steel Surfaces (on some models) Do not use a steel-wool pad; it will scratch the surface. Shake bottle well. Place a small amount of CERAMA BRYTE® Stainless Steel Appliance Cleaner on a damp cloth or damp paper towel. Clean a small area (approximately 8″ x 8″), rubbing with the grain of the stainless steel if applicable. Dry and buff with a clean, dry paper towel or soft cloth. Repeat as necessary. NOTE: If a mineral oil-based stainless steel appliance cleaner has been used before to clean the appliance, wash the surface with dishwashing liquid and water prior to using the CERAMA BRYTE® Stainless Steel Appliance Cleaner. After washing the surface with dishwashing liquid and water, use a generous amount of CERAMA BRYTE® Stainless Steel Appliance Cleaner to clean the appliance. To Order To order CERAMA BRYTE® Stainless Steel Appliance Cleaner, please call our toll-free number: National Parts Center 800.626.2002 ge.com CERAMA BRYTE® Stainless Steel Appliance Cleaner PM10X311 Glass Window (on some models) To clean the outside glass finish, use a glass cleaner. Rinse and polish with a dry cloth. Installation Instructions Troubleshooting Tips Consumer Support 31