Hotpoint RB757WHWW User Guide - Page 34

Glass surface-potential for permanent damage

Page 34 highlights

Safety Instructions ge.com Metal Marks and Scratches Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface. These marks are removable using the CERAMA BRYTE® Ceramic Cooktop Cleaner with the CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops. If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent. WARNING: Carefully check the bottom of pans for roughness that would scratch the cooktop. Cooktop Seal To clean the cooktop seal around the edges of the glass, lay a wet cloth on it for a few minutes, then wipe clean with nonabrasive cleaners. Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips Consumer Support Glass surface-potential for permanent damage. Our testing shows that if you are cooking high sugar mixtures such as jelly or fudge and have a spillover, it can cause permanent damage to the glass surface unless the spillover is immediately removed. Damage from Sugary Spills and Melted Plastic Turn off all surface units. Remove hot pans. Wearing an oven mitt: a. Use a single-edge razor blade scraper (CERAMA BRYTE® Ceramic Cooktop Scraper) to move the spill to a cool area on the cooktop. b. Remove the spill with paper towels. Any remaining spillover should be left until the surface of the cooktop has cooled. Don't use the surface units again until all of the residue has been completely removed. NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary. To Order Parts To order CERAMA BRYTE® Ceramic Cooktop Cleaner and the cooktop scraper, please call our toll-free number: National Parts Center 800.626.2002 CERAMA BRYTE® Ceramic Cooktop Cleaner WX10X300 CERAMA BRYTE® Ceramic Cooktop Scraper WX10X0302 Kit WB64X5027 (Kit includes cream and cooktop scraper) CERAMA BRYTE® Cleaning Pads for Ceramic Cooktops WX10X350 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

To order CERAMA BRYTE
®
Ceramic
Cooktop Cleaner and the cooktop
scraper, please call our toll-free number:
National Parts Center
. . . . . .
800.626.2002
CERAMA BRYTE
®
Ceramic
Cooktop Cleaner
. . . . . . . . . .# WX10X300
CERAMA BRYTE
®
Ceramic
Cooktop Scraper
. . . . . . . . .# WX10X0302
Kit
. . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and cooktop scraper)
CERAMA BRYTE
®
Cleaning Pads for
Ceramic Cooktops
. . . . . . . .# WX10X350
Turn off all surface units. Remove
hot pans.
Wearing an oven mitt:
a.
Use a single-edge razor blade
scraper (CERAMA BRYTE
®
Ceramic Cooktop Scraper) to
move the spill to a cool area on
the cooktop.
b.
Remove the spill with
paper towels.
Any remaining spillover should be
left until the surface of the cooktop
has cooled.
Don’t use the surface units again
until all of the residue has been
completely removed.
NOTE:
If pitting or indentation in the glass
surface has already occurred, the cooktop glass
will have to be replaced. In this case, service will
be necessary.
Damage from Sugary Spills and Melted Plastic
Our testing shows that if
you are cooking high sugar
mixtures such as jelly or
fudge and have a spillover,
it can cause permanent
damage to the glass surface
unless the spillover is
immediately removed.
Be careful not to slide pots and pans
across your cooktop. It will leave
metal markings on the cooktop
surface.
These marks are removable using
the CERAMA BRYTE
®
Ceramic
Cooktop Cleaner with the CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops.
If pots with a thin overlay of
aluminum or copper are allowed to
boil dry, the overlay may leave black
discoloration on the cooktop.
This should be removed immediately
before heating again or the
discoloration may be permanent.
WARNING:
Carefully check the bottom of pans
for roughness that would scratch the cooktop.
Metal Marks and Scratches
To Order Parts
Glass surface—potential for permanent damage
.
To clean the cooktop seal around the
edges of the glass, lay a wet cloth on it
for a few minutes, then wipe clean with
nonabrasive cleaners.
Cooktop Seal
33
ge.com
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting Tips
Safety Instructions
Consumer Support