Humax BLU-FOXS User Manual

Humax BLU-FOXS Manual

Get Humax BLU-FOXS PDF manuals and user guides View all Humax BLU-FOXS manuals
Add to My Manuals
Save this manual to your list of manuals

Humax BLU-FOXS manual content summary:

  • Humax BLU-FOXS | User Manual - Page 1
    Digital Satellite Receiver The default Password is 0000. User's Manual BLU-FOX S
  • Humax BLU-FOXS | User Manual - Page 2
    , use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice. ** Copyright (Copyright © 2006 HUMAX Corporation) Not to be copied, used or translated in part or whole
  • Humax BLU-FOXS | User Manual - Page 3
    manual aware of possible problems and information servicing to qualified service personnel. ** This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. ** This symbol indicates important instructions accompanying the product. ** Instruction
  • Humax BLU-FOXS | User Manual - Page 4
    Safety Warning This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** 90-250V AC 50/60Hz Operate this product only from the type of power supply indicated
  • Humax BLU-FOXS | User Manual - Page 5
    , ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. • Do not place the product on an unstable cart, stand, When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or
  • Humax BLU-FOXS | User Manual - Page 6
    Warning The mains plug, as a disconnection device, shall remain readily accessible by the user. ** 1. To avoid damage of the power cord or plug; • Do not modify or process the power cord or plug arbitrarily. • Do not bend or twist the power cord. • Make sure to disconnect the power cord holding the
  • Humax BLU-FOXS | User Manual - Page 7
    Powering On GB17 3. Installation Wizard GB18 3.1 Language GB18 3.2 Country GB18 3.3 Antenna Setting GB19 3.4 Software Update GB19 3.5 Select Service List GB20 4. Basic Operation GB21 4.1 Switching Channel GB21 4.2 Volume Control GB21 4.3 Option List GB22 4.4 Programme Information (i-plate
  • Humax BLU-FOXS | User Manual - Page 8
    Channels GB68 10.2 SMATV Search GB79 10.3 Default Setting GB81 11. Software Update GB82 11.1 OTA (Over the Air GB82 12. Menu Map GB84 13. Trouble Shooting GB85 13.1 Trouble Shooting GB85 13.2 Error Message GB87 14. Specification GB88 15. Glossary GB90 16. Service and Support GB92 7
  • Humax BLU-FOXS | User Manual - Page 9
    Using the Product This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. ** ** Front Panel ** Remote Control ** SCART-Cable User's Manual Batteries ** Note: • Faults may occur if the
  • Humax BLU-FOXS | User Manual - Page 10
    1. Before Using the Product 1.2 Front Panel ** ** 1. STANDBY LED ** Red light is emitted when the product is in standby mode. 2. TV LED ** Green light is emitted when the product is in TV mode. 3. RADIO LED ** Amber light is emitted when the product is in radio mode. 4. STANDBY BUTTON ** Switches
  • Humax BLU-FOXS | User Manual - Page 11
    1. Before Using the Product 1.3 Conditional Access Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can only be enjoyed via an appropriate Smartcard. The Conditional Access component is a removable Smartcard. 1. Inserting
  • Humax BLU-FOXS | User Manual - Page 12
    1. Before Using the Product 1.4 Rear Panel ** 1. LNB IN ** Connects a satellite antenna cable. ** 2. LNB OUT ** Connects another digital satellite receiver. ** 3. TV SCART ** Connects to the TV set using a TV SCART cable. 4. VCR SCART ** Connects to the VCR/DVD using a VCR SCART cable. 5. AUDIO L/R
  • Humax BLU-FOXS | User Manual - Page 13
    1. Before Using the Product 1.5 Remote Control ** 12
  • Humax BLU-FOXS | User Manual - Page 14
    12.STANDBY ** Switches between operation and standby modes. ** 13.EPG ** Displays the EPG (electronic programme guide). ** 14.EXIT ** Exits all On-Screen Display (OSD) screens. ** 15.V-/V+ ** Adjusts the audio ** 19.OPT ** Displays the audio, Multifeed, teletext and subtitle language services. 13
  • Humax BLU-FOXS | User Manual - Page 15
    to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. ** Note: If you encounter any problems setting up your product, please contact your local product distributor. 2.1 Connecting the Antenna/TV/VCR 1. Using SCART Cable Connect the product and
  • Humax BLU-FOXS | User Manual - Page 16
    2. Setup 2. Using RCA Cable Connect the product and the TV using the RCA cable as follows. ** 15
  • Humax BLU-FOXS | User Manual - Page 17
    2. Setup 2.2 Connecting the Audio System Connect the product and the audio system using the RCA (Audio L, R) cable as follows. If you wish to connect the optical S/PDIF terminal and Dolby Digital decoder to listen to digital audio, connect as follows. ** 16
  • Humax BLU-FOXS | User Manual - Page 18
    2. Setup 2.3 Powering On 1. Connect the power cord of the product to a wall outlet. ** ** 2. Power on by pressing the STANDBY of the product. ** button on the remote control or the STANDBY button on the front 17
  • Humax BLU-FOXS | User Manual - Page 19
    3. Installation Wizard 3. Installation Wizard When powering on your product for the first time after purchase, the installation wizard will operate automatically. This chapter includes the first time setup of the language, country, antenna setting and software update which will show you how to
  • Humax BLU-FOXS | User Manual - Page 20
    3. Installation Wizard 3.3 Antenna Setting You can configure the settings for channel search. 1. Satellite: Only the channels in ASTRA1 can be searched in installation wizard. To search channels in different satellites, go to Chapter10. 2. LNB Frequency: Select the required LNB frequency using
  • Humax BLU-FOXS | User Manual - Page 21
    is updated. Press the OK button to go to the next step. ** The search results of the selected service list will appear. Select Finish and press the OK button to complete the installation wizard. To go back to the previous step, select Back and
  • Humax BLU-FOXS | User Manual - Page 22
    4. Basic Operation 4. Basic Operation This chapter describes the basic functions of the product such as switching channel, volume control, option list and programme information. You can check or change the settings. 4.1 Switching Channel Switching Channel allows you to switch the current channel
  • Humax BLU-FOXS | User Manual - Page 23
    watch the screen from different camera perspectives while watching a sports transmission. Different options are provided to view single matches or can use your TV remote control unit to control the teletext service. All teletext supporting channels have the teletext icon on the i-plate. 1. Press
  • Humax BLU-FOXS | User Manual - Page 24
    4. Basic Operation 4. Subtitle You can select the language for the subtitle if the programme provides subtitle information. 1. Press the OPT button. 2. Select Subtitle using the button and press the button. 3. Select the required subtitle language using the button and press the OK button.
  • Humax BLU-FOXS | User Manual - Page 25
    Dolby Digital. ** ** Displayed only if this programme is reserved. ** ** Represents parental level. Indicates the minimum level of age for viewing the programme. ** ** Displayed when BLUCOM services are provided. ** Displayed when the audio track is dual mono. ** 24
  • Humax BLU-FOXS | User Manual - Page 26
    4. Basic Operation 3. Programme name 4. Current time & date 5. Next programme information: Displayed if next programme information is provided. Press the button to display next programme information. 6. Programme broadcasting time and progress bar: Displays programme playing time and progress bar.
  • Humax BLU-FOXS | User Manual - Page 27
    4. Basic Operation 4.5 Mosaic Channels You can view the mosaic channels the broadcaster sends; icons for each broadcasting service are displayed in cell forms. To move to the selected channel, place the cursor on the cell representing the channel you wish to view. When
  • Humax BLU-FOXS | User Manual - Page 28
    5. Channel List 5. Channel List This chapter will help you display the channel list using the LIST channel list. button and switch to another channel in the ** Six types of channel lists are provided for quick and easy channel search. TV The list of all TV channels Radio The list of all
  • Humax BLU-FOXS | User Manual - Page 29
    5. Channel List 1. Deleting Channels 1. Select a channel to delete and press the i button. 2. Select Delete using the button. button and press the OK 3. A pop-up will appear. Select Yes and press the OK button. 4. You will be prompted to enter your password. Enter your password and press the
  • Humax BLU-FOXS | User Manual - Page 30
    5. Channel List 3. A keyboard will appear. Enter the name of the channel you wish to rename. Previous Switch to the previous keyboard. Next Switch to the next keyboard. Aa Change to upper case/lower case keyboard. ** 4. Select Save and press the OK button to confirm your choice. ** Note:
  • Humax BLU-FOXS | User Manual - Page 31
    5. Channel List 4. Using Lock/Unlock 1. Select a channel to lock/unlock and press the i button. 2. When locking an unlocked channel, select Lock and press the OK button. Lock will become Unlock. 3. When unlocking a locked channel, select Unlock and press the OK button. A pop-up requiring your
  • Humax BLU-FOXS | User Manual - Page 32
    5. Channel List 5.3 Bouquet List Bouquet List displays the list of channels included in the bouquet the user selects. 1. Press the LIST button while watching a programme. 2. Press the YELLOW button on the remote control. 3. Press the LIST button again and select a bouquet to view, and press
  • Humax BLU-FOXS | User Manual - Page 33
    ) displays the detailed programme information of each channel, in time and date order. You can customize your own programme guide to list the channels or programmes of interest to you and schedule your viewing using the programme information. ** Note: Press the EPG or EXIT button
  • Humax BLU-FOXS | User Manual - Page 34
    6. EPG 2. Reserving Programmes You can make reservations for the future programmes you wish to watch automatically. 1. Select the programme you want to reserve and press the OK button. A pop-up will appear. 2. To change Channel, press the button. You can also enter the channel number using the
  • Humax BLU-FOXS | User Manual - Page 35
    6. EPG 3. Channel List You can change the channel using the channel list. 1. Press the LIST button to view the channel list. 2. Select the channel you want using the button and press the OK button. If the contents are more than one page, use PAGE button to skip to the next page. 3. The EPG
  • Humax BLU-FOXS | User Manual - Page 36
    6. EPG 6.3 Schedule List Schedule List displays the list of the programmes reserved. You can modify, delete or make new reservations. 1. Press the EPG button. 2. Press the YELLOW button to display the schedule list. 3. The reserved programmes will be displayed in time order. 4. Select the
  • Humax BLU-FOXS | User Manual - Page 37
    6. EPG 3. New Reservation 1. Select a blank space using the button and press the OK button. 2. Reservation pop-up will appear. Enter the channel number, start/end time, date, repeat frequency and programme name and press the OK button. (Refer to 2. Reserving Programmes in EPG Main.) ** Note: •
  • Humax BLU-FOXS | User Manual - Page 38
    6. EPG 2. Entering Programme Name 1. Select Name using the button. button and press the OK 2. Keyboard will appear. Enter the programme name on the keyboard screen. Previous Switch to the previous keyboard. Next Switch to the next keyboard. Aa Change to upper case/lower case keyboard. **
  • Humax BLU-FOXS | User Manual - Page 39
    6. EPG 5. Search Result 1. After setting more than one required value, select Start and press the OK button to proceed. 2. The search result of the entered values will appear. 3. To reserve a programme, select a future programme and press the OK button. 4. To search again, press the BLUE button. 38
  • Humax BLU-FOXS | User Manual - Page 40
    7. entavio Menu 7. entavio Menu In this chapter you can easily access the service features. Options such as PIN-Code change, Smartcard, software update, antenna setting and channel search settings are included in entavio Menu. ** Note: Press the BACK
  • Humax BLU-FOXS | User Manual - Page 41
    7. entavio Menu 3. Enter your current PIN-Code. 4. Enter your new PIN-Code. 5. Confirm your new PIN-Code. ** Note: When changing the PIN-Code, do not repeat the same figures. 40
  • Humax BLU-FOXS | User Manual - Page 42
    7. entavio Menu 2. In case of entering four identical figures If you enter four identical figures as your new PIN-Code, an error message will appear. You will be prompted to enter another four-digit number as your new PIN-Code. 3. In case of entering a wrong PIN-Code If you enter the wrong PIN-Code
  • Humax BLU-FOXS | User Manual - Page 43
    7. entavio Menu 7.2 Smartcard Smartcard displays the Smartcard information. 1. Press the MENU button. 2. Select entavio Menu using the button. button and press the OK 3. Select Smartcard using the button. button and press the OK 4. The Smartcard information will be displayed. ** Note: The
  • Humax BLU-FOXS | User Manual - Page 44
    7. entavio Menu 7.3 Software Update You can update the latest software. 1. Press the MENU button. 2. Select entavio Menu using the button. button and press the OK 3. Select Software Update and press the OK button. 4. The system information will be displayed. Select Software Update and press
  • Humax BLU-FOXS | User Manual - Page 45
    7. entavio Menu 7.4 Antenna Setting You can view the setting information for channel search. 1. Press the MENU button. 2. Select entavio Menu using the button. button and press the OK 3. Select Antenna Setting and press the OK button. 4. Enter the value for Satellite, LNB Frequency, 22kHz
  • Humax BLU-FOXS | User Manual - Page 46
    available. 1. Press the MENU button. 2. Select entavio Menu using the button. button and press the OK 3. Select Standard Search and press the OK button. 1. Select Service List Select Service List enables you to choose from the current LCN list and the searched LCN list. 1. Select Select
  • Humax BLU-FOXS | User Manual - Page 47
    of the service list is available, a pop-up will appear. 1. Select OK and press the OK button to close the pop-up. 2. Select Add to the preferred channels (list) and press the OK button to add the new channels to the preferred channel list. ** 7.6 Expert Search You can search channels manually
  • Humax BLU-FOXS | User Manual - Page 48
    8. Setting 8. Setting In this chapter you can set parental control, country setting, language setting, time setting, A/V setting, Dolby Digital and other configuration items to keep limitations where you want them for the viewers. ** Note: Press the BACK button to save the changes and return to
  • Humax BLU-FOXS | User Manual - Page 49
    8. Setting 2. Allow Time Control You can block programmes according to the pre-set watching time. 1. Select Allow Time Control using the button. 2. Select Enable/Disable using the OK or button. Enable Disable You can watch programmes during the specified time only. You can watch programmes
  • Humax BLU-FOXS | User Manual - Page 50
    region using the OK or button. 2. If you change the county, a pop-up asking whether you want to replace the editable channels 1-99 of the service list with a predefined list will appear. Select Yes or No and press the OK button. 3. A pop-up asking whether you want to replace the fixed
  • Humax BLU-FOXS | User Manual - Page 51
    8. Setting 8.3 Language Setting Language Setting enables you to set the basic language options such as menu language, audio language, audio priority, subtitle language, subtitle display and subtitle font. 1. Press the MENU button. 2. Select Setting using the button. button and press the OK 3.
  • Humax BLU-FOXS | User Manual - Page 52
    allows you to show the subtitles automatically. This service is provided when subtitles are available. 1. Select Subtitle Display using the button. 2. Select one option from Auto and Manual using the OK or button. Auto Manual Subtitles are displayed automatically in the predefined subtitle
  • Humax BLU-FOXS | User Manual - Page 53
    8. Setting 8.4 Time Setting Time Setting allows you to set the current time or set the time you want to turn on/off the product. 1. Press the MENU button. 2. Select Setting using the button. button and press the OK 3. Select Time Setting using the button. button and press the OK 1. GMT
  • Humax BLU-FOXS | User Manual - Page 54
    8. Setting 2. Power ON You can set the time you want the product to be automatically turned on. 1. Select Power ON using the button. 2. Select Enable/Disable using the OK or button. Enable Uses Power ON and sets the time the product should be turned on. Disable Does not use Power ON. ** 3.
  • Humax BLU-FOXS | User Manual - Page 55
    8. Setting 8.5 A/V Setting You can set the output of the audio or video. 1. Press the MENU button. 2. Select Setting using the button. 3. Select A/V Setting using the button. button and press the OK button and press the OK 1. TV-SCART 1. Select TV-SCART using the button. 2. Select one
  • Humax BLU-FOXS | User Manual - Page 56
    8. Setting 3. Audio Output 1. Select Audio Output using the button. 2. Select one option from Mono and Stereo using the OK or button. 4. Screen Ratio 1. Select Screen Ratio using the button. 2. Select an option from 4:3 and 16:9 using the OK or button. 5. Display Format 1. Select Display
  • Humax BLU-FOXS | User Manual - Page 57
    8. Setting 8.6 Dolby Digital You can set Dolby Digital automatically. 1. Press the MENU button. 2. Select Setting using the button. button and press the OK or 3. Select Dolby Digital using the or button. button and press the OK 4. Automatic Selection will appear. Select on or off using the
  • Humax BLU-FOXS | User Manual - Page 58
    8. Setting 8.7 Other Settings You can configure other settings. 1. Press the MENU button. 2. Select Setting using the button. button and press the OK 3. Select Other Settings using the button. button and press the OK 1. i Display Time You can set the automatic display time of the
  • Humax BLU-FOXS | User Manual - Page 59
    BLUCOM Setting using the OK or button. button, and press the Note: The BLUCOM icon will appear on the i-plate when BLUCOM services are provided. BLUCOM supplementary information can only be displayed using a BLUCOM-compatible cell phone. For more information, visit www.blucom.de ** 1. Device
  • Humax BLU-FOXS | User Manual - Page 60
    8. Setting 2. Visibility You can configure your receiver to be recognized by other Bluetooth devices (such as cell phones). 1. Select Visibility using the the OK or button. button and press 2. Select one option from yes or no using the OK or button. Yes The receiver can be detected by other
  • Humax BLU-FOXS | User Manual - Page 61
    8. Setting 4. Bluetooth Authorization You can enable authorization for access of BLUCOM-compatible cell phones to the receiver. 1. Select Bluetooth Authorization using the press the OK . button and 2. Select one option among On and Off using the OK or button. On Password is required. Off No
  • Humax BLU-FOXS | User Manual - Page 62
    9. Edit Channels 9. Edit Channels In this chapter you can edit all channels, the preferred channels or make changes to the favourite lists of the channels you have chosen. ** Note: • Press the BACK button to save the changes and return to the previous menu. Press the MENU to exit the menu screen
  • Humax BLU-FOXS | User Manual - Page 63
    9. Edit Channels 9.2 Edit Channels Edit Channels enables you to rename, lock/unlock, move the channels and select channel group, select all or delete the channels. ** Note: • The ASTRA LCN channels (from 100) will be frequently updated by ASTRA and cannot be edited. • You can select your
  • Humax BLU-FOXS | User Manual - Page 64
    9. Edit Channels 3. Enter a channel name directly using the keyboard displayed on the screen. 4. When entering channel name is complete, select Save and press the OK button. ** Note: For detailed information on using the keyboard, refer to 5.1.2 Renaming Channels. 2. Locking/Unlocking Channels 1.
  • Humax BLU-FOXS | User Manual - Page 65
    9. Edit Channels 4. Selecting a Channel Group You can select the channel list group to edit. 1. Press the GREEN button on the remote control to display the group of channel lists. 2. Select the group you want using the OK button. button and press the 5. Select/Unselect All Channels 1. Press
  • Humax BLU-FOXS | User Manual - Page 66
    9. Edit Channels 9.3 Edit Favourite Channels You can rename favourite groups, move favourite channels, select favourite groups, select/unselect all channels, add or remove channels from the favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the button. button and
  • Humax BLU-FOXS | User Manual - Page 67
    9. Edit Channels 2. Moving Favourite Channels You can move the favourite channels to a different location within the favourite channel list. This function changes the location only and does not affect the number of the channel. 1. Select the favourite channels to move within the favourite channel
  • Humax BLU-FOXS | User Manual - Page 68
    9. Edit Channels 4. Selecting/Unselecting All Channels 1. Press the YELLOW channels. button on the remote control to select all 2. To release one or more channels from select all, press the OK button while the cursor is on the selected channel. ** Note: Up to 100 channels can be saved in
  • Humax BLU-FOXS | User Manual - Page 69
    10. Installation 10. Installation In this chapter you can configure installation settings such as search channels, SMATV search and default setting. ** Note: Press the BACK button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen. 10.1 Search
  • Humax BLU-FOXS | User Manual - Page 70
    10. Installation Satellite 1. Select Satellite using the button. 2. Select the satellite the antenna is pointing to from the options using the OK or button. 3. If the required satellite is not available in the list, select User Define. When pop up appears, select Yes and press the OK button to
  • Humax BLU-FOXS | User Manual - Page 71
    10. Installation 2. Motor Antenna When using a motor antenna, set the antenna to Motor before performing channel search. 1. Press the OPT button to switch to motor antenna in Antenna Setting mode. 2. A pop-up message will appear. Select Yes and press the OK button. ** Motor Type You should
  • Humax BLU-FOXS | User Manual - Page 72
    10. Installation ** • Motor Type 1. Select Motor Type using the button. 2. Select one option from DiSEqC1.2 and USALS using the OK or button. DiSEqC1.2 USALS General motor antenna using DiSEqC1.2 Motor antenna using USALS Note: When Motor Type is set as DiSEqC 1.2, both My Longitude and My
  • Humax BLU-FOXS | User Manual - Page 73
    10. Installation Edit Satellite Data You can set the position of the satellite, which the motor antenna heads for, and decide whether or not to use the satellite. 1. Select Edit Satellite Data from Motor Antenna Setting using the button and press the OK button. 2. Enter the appropriate value
  • Humax BLU-FOXS | User Manual - Page 74
    10. Installation Motor Setting You can set the motor antenna for more efficient channel search. Select Motor Setting from Motor Antenna Setting using the button and press the OK button. ** • Satellite 1. Select Satellite using the button. 2. Select the satellite the antenna is pointing to from
  • Humax BLU-FOXS | User Manual - Page 75
    10. Installation • Go to Stored Position Move the antenna to the position of the selected satellite. 1. Select Go to Stored Position using the button and press the OK button. 2. Wait till the antenna moves to the position of the satellite. 3. Confirm signal strength and quality level and fine
  • Humax BLU-FOXS | User Manual - Page 76
    10. Installation Installer Menu You can set default setting and operation limit for motor antenna. 1. Select Installer Menu from Motor Antenna Setting and press the OK button. 2. To save the present location, change the Motor Limit to Enable. ** Note: When Motor Limit is set to Enable, Limit
  • Humax BLU-FOXS | User Manual - Page 77
    10. Installation • Reset Position You can restore the position saved at motor antenna to the default setting. 1. Select Reset Position using the button and press the OK button. 2. Pop-up will appear. Select OK and press the OK default setting. button to restore all values saved at motor
  • Humax BLU-FOXS | User Manual - Page 78
    10. Installation 4. Network Search 1. Select Network Search using the button. 2. Select Enable/Disable using the OK or button. 5. Scrambled Type 1. Select Scrambled Type using the button. 2. Select one option among All, FTA and CAS using the OK or button. 6. Channel Type 1. Select Channel
  • Humax BLU-FOXS | User Manual - Page 79
    10. Installation 7. Search Result 1. Select Search and press the OK button. 2. Channel search will activate. 3. To delete search results, select the channels you wish to delete using the button. Select Delete and press the OK button. 4. To save search results, select Save and press the OK
  • Humax BLU-FOXS | User Manual - Page 80
    Select SMATV Search using the button. button, and press the OK 2. Select Search Type using the button. 3. Select one option from Auto and Manual using the OK or button. 1. SMATV Automatic Search Start/End Frequency 1. Select Start/End Frequency using the button. 2. Enter the frequency using
  • Humax BLU-FOXS | User Manual - Page 81
    10. Installation 2. SMATV Manual Search Frequency 1. Select Frequency using the button. button and press the OK 2. Enter the frequency using the NUMERIC(0-9) buttons. ** Note: Enter the frequency from 950
  • Humax BLU-FOXS | User Manual - Page 82
    10. Installation 10.3 Default Setting Default Setting enables you to restore the product to the factory default. ** Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel list and all user configured data will be deleted. 1. Press the
  • Humax BLU-FOXS | User Manual - Page 83
    of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. ** http://www.humaxdigital.com. ** It is recommended that you periodically check for the availability of software update. 11.1 OTA (Over
  • Humax BLU-FOXS | User Manual - Page 84
    11. Software Update 1. Mandatory Update 1. A message will pop up to notify that software update is available. 2. Select Now and press the OK update immediately. button to perform software 3. Select Later and press the OK button to update the software later. You can postpone the update twice.
  • Humax BLU-FOXS | User Manual - Page 85
    12. Menu Map 12. Menu Map ** 84
  • Humax BLU-FOXS | User Manual - Page 86
    . Trouble Shooting 13. Trouble Shooting 13.1 Trouble Shooting Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions
  • Humax BLU-FOXS | User Manual - Page 87
    13. Trouble Shooting 4. No or poor sound - Check that your AV cable is connected correctly. - Check the volume levels of your TV set and the product. - Check
  • Humax BLU-FOXS | User Manual - Page 88
    Trouble Shooting 13.2 Error Message Error message No or bad signal Possible causes The satellite dish is not pointing at the satellite. Signal is too weak. The channel is scrambled or not available. Satellite dish is too small. Problem supports service center in case damaged has occurred. 87
  • Humax BLU-FOXS | User Manual - Page 89
    14. Specification 14. Specification Tuner & Channel Input Connector Frequency Range Signal Level LNB Power & Polarisation 22KHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC mode MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution
  • Humax BLU-FOXS | User Manual - Page 90
    14. Specification Audio/Video/Data In/Out Video Audio Data Power Supply Input Voltage Type Power Consumption Protection Physical Specification Size Weight (Net) Operating Temperature Storage Temperature TV-SCART (CVBS, S-Video, RGB) VCR-SCART (CVBS, S-Video) RCA-Type (CVBS) TV-SCART, VCR-SCART,
  • Humax BLU-FOXS | User Manual - Page 91
    LNBs through a DiSEqC switching box. ** EPG(Electronic Programme Guide) An electronic equivalent to a printed television listings magazine; it To-Air) An unscrambled broadcaster allowing customers to view channels or services without paying any subscription. ** Hi-Fi (High Fidelity) The
  • Humax BLU-FOXS | User Manual - Page 92
    divided up in parts called transponders. A transponder is one distribution section of the satellite. Each transponder can be used for distribution of several channels or services. ** 91
  • Humax BLU-FOXS | User Manual - Page 93
    16. Service and Support 16. Service and Support Information concerning troubleshooting, software upgrade and product support is provided in the following websites and call centers. Should your product require warranty service, please contact HUMAX to obtain the appropriate authorization. HUMAX
  • Humax BLU-FOXS | User Manual - Page 94
    16. Service and Support ** Sverige Tfn: Öppettider: Språk: ** Suomi +46 (0)550 85527 Mån-fre 08:00- mail: Website: Language: ** 0820 400675 (€0,14/min) Mon-Sun 8:00-23:00 [email protected] www.humax-digital.de Deutsch/English/Turkish Note: For hardware repair, please visit our website 93
  • Humax BLU-FOXS | User Manual - Page 95
    www.humaxdigital.com RoHS/Manual/BLUFOXS/300DE *20007-1560PT* 20007-5730PT

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.