Humax CX-FOXC User Manual

Humax CX-FOXC Manual

Get Humax CX-FOXC PDF manuals and user guides View all Humax CX-FOXC manuals
Add to My Manuals
Save this manual to your list of manuals

Humax CX-FOXC manual content summary:

  • Humax CX-FOXC | User Manual - Page 1
  • Humax CX-FOXC | User Manual - Page 2
    under license from Dolby Laboratories. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. ** Thank you for purchasing a HUMAX product. Please read this user manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user
  • Humax CX-FOXC | User Manual - Page 3
    instructions provided. For your safety, be aware of the following precautions. ** Warnings, Cautions and Notes Throughout the whole manual make the user aware of possible problems and information of any importance No user serviceable parts inside. Refer servicing to qualified service personnel. This
  • Humax CX-FOXC | User Manual - Page 4
    similar surface. If you place the product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand, tripod, bracket or table from where it can fall. A falling product
  • Humax CX-FOXC | User Manual - Page 5
    they can touch dangerous voltage points or damage parts. ** 12. REPLACEMENT of PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer, or those that have the same characteristics as the original part. Unauthorized substitution
  • Humax CX-FOXC | User Manual - Page 6
    Channel List GB27 5.2 Edit Channel Lists GB28 5.3 Edit Favourite Channels GB30 5.4 Channel Change Mode GB34 6. Programme Guide GB35 6.1 Viewing Programme Guide Information GB35 6.2 Finding a Programme GB37 6.3 Viewing Reserved Programme GB38 7. Preferences GB40 7.1 Parental Control GB40
  • Humax CX-FOXC | User Manual - Page 7
    GB59 10.1 Status GB59 10.2 Signal Detection GB59 10.3 Conditional Access (for Conax embedded GB60 11. Games GB61 12. Menu Map GB62 13. Troubleshooting GB63 13.1 Trouble Shooting GB63 13.2 Error Message GB64 14. Specification GB66 15. Glossary GB68 16. Service and Support GB69 GB 6
  • Humax CX-FOXC | User Manual - Page 8
  • Humax CX-FOXC | User Manual - Page 9
  • Humax CX-FOXC | User Manual - Page 10
    1.3 Conditional Access Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can only be enjoyed via a Conditional Access component. The Conditional Access component is a removable Smartcard. 1. Inserting the Smartcard The
  • Humax CX-FOXC | User Manual - Page 11
    1. Before Using the Product 1.4 Rear Panel ** ** 1. CABLE IN Connects a cable to a CABLE input jack on the product. ** 2. TV/VCR Connects a RF signal from the product to RF (ANT) input jack on your TV or VCR. ** 3. TV SCART Connects a TV SCART cable. ** 4. VCR SCART Connects a VCR SCART cable. ** 5.
  • Humax CX-FOXC | User Manual - Page 12
    1.5 Remote Control ** 1. SOURCE Controls the input of TV. ** 2. TV/RADIO Switches between TV and radio modes. 3. NUMERIC(0~9) BUTTONS Enters a TV/radio channel number or menu option number. 4. LIST Displays the channel list. GB 11
  • Humax CX-FOXC | User Manual - Page 13
    + Changes the channel or page. ** 10. MENU Displays the main menu. ** 11. STANDBY Switches between operation and standby modes. ** 12. GUIDE Displays the programme guide. ** 13. EXIT Exits all On-Screen Display (OSD) screens. ** 14. OK Selects a menu or confirms the selected operation. Also displays
  • Humax CX-FOXC | User Manual - Page 14
    most appropriate procedure depending on the equipment you have. Note: If you encounter any problems setting up your product, please contact your local product distributor. ** 2.1 Connecting socket on the product for receiving cable services. • The TV SCART is connected as in the figure above. GB 13
  • Humax CX-FOXC | User Manual - Page 15
    2. Setup 2. Connecting TV/VCR with 2 SCARTs This is the optimal way to connect the product. ** GB 14
  • Humax CX-FOXC | User Manual - Page 16
    3. Connecting Audio System If you wish to connect S/PDIF to the optical S/PDIF terminal and Dolby Digital decoder to listen to digital audio, connect as the following. ** GB 15
  • Humax CX-FOXC | User Manual - Page 17
    2. Setup 2.2 Powering On 1. Connect the power cord of the product to a wall outlet. ** ** 2. Power on by pressing the STANDBY button on the remote control or the STANDBY button on the front of the product. ** GB 16
  • Humax CX-FOXC | User Manual - Page 18
    3. Installation Wizard 3. Installation Wizard When powering on the product for the first time after purchasing, the installation wizard will operate automatically. You can easily set-up using simple organisation and options and watch the broadcasting after completing the set-up procedure. You can
  • Humax CX-FOXC | User Manual - Page 19
    3. Installation Wizard 3.3 Channel Search You can search channels automatically or manually. If you select manual search, you have to set parameters for search. • Search Type: Select Auto or Manual. If Manual is selected, the following options will be activated. • Frequency: Select frequency
  • Humax CX-FOXC | User Manual - Page 20
    3.4 Time Setting You can set the current time. Press the OK or button to display GMT list. Select the appropriate GMT offset value using the button and press the OK button to set the current time. Note: If GMT offset is Auto, it is automatically set depending on your country. However, if the time
  • Humax CX-FOXC | User Manual - Page 21
    TV channel and radio channel. Note: You can switch channel using the channel list or programme guide. For more information, please refer to Chapter 5. Channel List and 6. Programme Guide. ** 4.2 Volume Control 1. Press the V-/V+ 2. Press the MUTE or button to adjust the audio volume. button to
  • Humax CX-FOXC | User Manual - Page 22
    Setting-Audio Priority, the programme is automatically broadcasted in Dolby Digital audio regardless of default audio language. ** 4.5 Teletext When the channel supports teletext, the teletext icon ( ) is displayed on the i-plate. To enter the teletext mode, press the TELETEXT ON/OFF button or
  • Humax CX-FOXC | User Manual - Page 23
    4. Basic Operation Teletext Functions Index Returns to index page. If there is no index page, jump to page 100. Sub-page Searches the sub-page using the sub-code written by users. MIX Adjusts transparency of teletext screen. Cancel Hides the teletext except page number. Reveal Displays the
  • Humax CX-FOXC | User Manual - Page 24
    4.6 Programme Information (i-plate) Programme information is displayed for a certain period of time whenever you switch channels. You can view the programme information by pressing the i button while watching a programme. Press the EXIT button to hide the i-plate. 1. General Information The general
  • Humax CX-FOXC | User Manual - Page 25
    4. Basic Operation ** 7. Programme broadcasting time and progress bar: Displays programme playing time and progress bar. 8. Next programme information : Displayed if next programme information is provided. Press the button to display the next programme information. Note: If there is no programme
  • Humax CX-FOXC | User Manual - Page 26
    5. Move to the parent menu using the button to save the changes automatically. Note: For detailed information about how to change Favourite group's name and how to register all channels in Favourite channel, refer to Chapter 5. Channel List. 2. Locking/Unlocking a Channel You can lock or unlock
  • Humax CX-FOXC | User Manual - Page 27
    4. Basic Operation ** 3. Deleting a Channel You can delete the current channel while watching a programme. 1. Press the OPT+ button. 2. Select Delete using the the OK or button. button and press 3. Select Yes in the confirmation message and press the OK button. 4. Enter the password using the
  • Humax CX-FOXC | User Manual - Page 28
    5. Channel List 5. Channel List Three types of channel lists are provided for easy and quick channel browsing. TV Radio Favourite The list of all TV channels with two sub-groups: one is sorted by channel number, the other is sorted by channel name. The list of all radio channels with two sub-
  • Humax CX-FOXC | User Manual - Page 29
    5. Channel List 5.2 Edit Channel Lists You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the and press the OK or button. button 3. Select Edit Channel Lists using the button and press the OK or button. 4. You will be
  • Humax CX-FOXC | User Manual - Page 30
    2. Deleting Channels You can delete one or more channels. 1. Move the cursor to the channel list using the button. 2. Select a channel and then press the OK button. You can select multiple channels. 3. Select Delete using the button and press the OK button. 3. Locking/Unlocking Channels You can lock
  • Humax CX-FOXC | User Manual - Page 31
    5. Channel List 4. Selecting/Unselecting All Channels You can select or unselect all channels at once. 1. Select Select All and press the OK button to select all channels. 2. Select Unselect All and press the OK button to unselect all the selected channels. 5.3 Edit Favourite Channels You can
  • Humax CX-FOXC | User Manual - Page 32
    The buttons for editing Favourite channel list are described in the following table. ** Add ** Remove ** TV/Radio ** Fav.Group ** Move ** Rename ** Sort ** Unselect All ** Adds Favourite channel. ** Removes from Favourite channel. ** Switches between TV and radio channel list. ** Changes Favourite
  • Humax CX-FOXC | User Manual - Page 33
    5. Channel List 2. Moving Favourite Channels You can move Favourite channel(s) to the location you want within Favourite channel list. This function changes the location only without changing the channel number. 1. Select Favourite group using . 2. Select the channel to move within Favourite
  • Humax CX-FOXC | User Manual - Page 34
    4. Additional Features Additional features provides many useful functions when editing Favourite channels. ** Changing between TV and radio channel list You can add not only TV channel(s) but also radio channel(s) to Favourite channel list. Press to switch all channel list into TV or radio channels
  • Humax CX-FOXC | User Manual - Page 35
    5. Channel List 5.4 Channel Change Mode You can change the channel either in the group or in the entire group while watching a programme. 1. Press the MENU button. 2. Select Edit Channels using the and press the OK or button. button 3. Select Channel Change Mode using the button and press the
  • Humax CX-FOXC | User Manual - Page 36
    the detailed information for the selected channel. 1. Viewing Guide Information by Channel Groups You can view programme information of the selected channel list by groups. 1. Press the GUIDE button. 2. Press the RED button to display the channel list group
  • Humax CX-FOXC | User Manual - Page 37
    Programme Information Using Time Bar You can quickly search the time zone you want using the time bar. 1. Press the GUIDE button. 2. Press the GREEN button to display the time bar. 3. Select the time bar using the button and press the OK button to move the
  • Humax CX-FOXC | User Manual - Page 38
    Finding a Programme You can sufficiently find the programme you want by programme name or genre. 1. Press the GUIDE button. 2. Press the BLUE button. 3. Enter the programme name directly using the keyboard displayed on the screen. Note: If you select Previous or Next on
  • Humax CX-FOXC | User Manual - Page 39
    6.3 Viewing Reserved Programme You can add or edit reserved programmes using the schedule screen. 1. Press the GUIDE button. 2. Press the YELLOW button. 1. Editing a Reserved Programme 1. Select the reserved programme and press the OK button to edit the reservation information. 2. Change
  • Humax CX-FOXC | User Manual - Page 40
    2. Adding a Reservation 1. Select a blank space and press the OK button to add a new reservation. 2. Enter Channel No. using the NUMERIC(0~9) buttons. The channel name is automatically displayed by channel number. 3. Enter Start Time/End Time using the button and the NUMERIC(0~9) buttons. 4. Select
  • Humax CX-FOXC | User Manual - Page 41
    7. Preferences 7. Preferences You can set censorship, watching time and all other items suitable for your environment. Note: • Press the BACK Press the MENU or button to save the changes and return to the previous menu. or EXIT button to exit the menu screen. • You can easily select any item
  • Humax CX-FOXC | User Manual - Page 42
    View All All programmes can be watched because there is no age limitation. 7 Programmes are blocked for children under the age of 7. 12 Programmes are blocked for children under the age of 12. 15 Programmes are blocked for children under the age of 15. 18 Programmes are blocked for children
  • Humax CX-FOXC | User Manual - Page 43
    7. Preferences 3. Change Password You can change the existing password. 1. Select Change Password using the and press the OK or button. button 2. Enter New Password using the NUMERIC(0~9) buttons, select OK and press OK button. 3. Enter New Password again to confirm Verify Password and press
  • Humax CX-FOXC | User Manual - Page 44
    the subtitle automatically if provided. 1. Select Subtitle Display using the button. 2. Select one option from Auto and Manual using the OK or button. Auto Manual Subtitles are displayed automatically in the predefined subtitle language. Subtitles are displayed in the language when you select
  • Humax CX-FOXC | User Manual - Page 45
    7. Preferences 7.3 Time Setting 1. Press the MENU button. 2. Select Preferences using the press the OK or button. 3. Select Time Setting using the press the OK or button. button and button and 1. GMT Offset You can set the GMT offset for current time. 1. Select GMT Offset using the press the OK
  • Humax CX-FOXC | User Manual - Page 46
    2. Power On You can set the time when the product is automatically powered on. 1. Select Power On using the button. ** 2. Select Enable/Disable using the OK or button. Enable Uses Power On and sets the Power On time. Disable Does not use Power On. ** 3. When you have selected Enable, enter
  • Humax CX-FOXC | User Manual - Page 47
    7. Preferences 7.4 Schedule You can reserve a programme and watch it anytime you want. 1. Press the MENU button. 2. Select Preferences using the press the OK or button. button and 3. Select Schedule using the button and press the OK or button. 4. Reserved programme list is displayed on the
  • Humax CX-FOXC | User Manual - Page 48
    1. TV-SCART You can set TV SCART output. 1. Select TV-SCART using the button. 2. Select one option from CVBS and RGB using the OK or button. 2. VCR-SCART You can set VCR SCART output. 1. Select VCR-SCART using the button. 2. Select one option from CVBS and S-Video using the OK or button.
  • Humax CX-FOXC | User Manual - Page 49
    7. Preferences 7.6 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the press the OK or button. button and 3. Select Miscellaneous Settings using the button and press the OK or button. 1. i-Plate Display Time You can set the duration during the information box is
  • Humax CX-FOXC | User Manual - Page 50
    8. Installation 8. Installation 8.1 Automatic Search If the product is connected to the cable and TV, you can automatically search channels without entering any other information. 1. Press the MENU button. 2. Select Installation using the press the OK or button. button and 3. Select Automatic
  • Humax CX-FOXC | User Manual - Page 51
    one option among Disable, Enable and User Define using the button and press the OK button. 3. When you select User Define to set the network manually, enter network value using the NUMERIC(0~9) buttons. GB 50
  • Humax CX-FOXC | User Manual - Page 52
    4. Append Symbol Rate 1. Select Append Symbol Rate using the button and press the OK or button. 2. Select the symbol rate using the and press the OK button. button 3. It will be displayed symbol rates that you selected. The product will search channels by all of symbol rates that you selected.
  • Humax CX-FOXC | User Manual - Page 53
    button. button and 2. Select frequency value using the and press the OK button. button 3. When you select User Define to set frequency manually, enter frequency value using the NUMERIC(0~9) buttons. 2. Symbol Rate 1. Select Symbol Rate using the press the OK or button. button and 2. Select
  • Humax CX-FOXC | User Manual - Page 54
    : Enable allows you to use Network ID. 4. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start manual search. 2. The next procedures are similar to those for the automatic search. Please refer to 8.1 Automatic Search. GB 53
  • Humax CX-FOXC | User Manual - Page 55
    8. Installation 8.4 Default Setting Default Setting restores the product to the default settings. ** Warning: Please note that once you perform the default setting, all data such as the channel list and user configured data are deleted. ** 1. Press the MENU button. 2. Select Installation using
  • Humax CX-FOXC | User Manual - Page 56
    is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. - detected automatically, but in case it is not, you should perform automatic or manual update. ** Caution: • Please be careful to keep the power on and
  • Humax CX-FOXC | User Manual - Page 57
    9. Software Update 1. If new software is found when powering on 1. A message will be displayed to notify that new software is found. 2. Select Yes and press the OK update the software. button to 3. Starts downloading new software. Please wait until the update is completed. 4. When completing
  • Humax CX-FOXC | User Manual - Page 58
    OK button to finish search. 7. When detecting update software, the following result is displayed. If new software is not found by Automatic Update, use Manual Update. 8. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without
  • Humax CX-FOXC | User Manual - Page 59
    Software Update using the and press the OK or button. button 5. Select Manual Update using the button and press the OK or button. 6. Set Frequency If new software does not exist, press the OK button to return to the manual update menu. 10. Select Yes and press the OK button to start updating.
  • Humax CX-FOXC | User Manual - Page 60
    10. System Information 10. System Information You can view all system information, signal strength and Smartcard information. 1. Press the MENU button. 2. Select System using the button and press the OK or button. 10.1 Status You can view the system information. 1. Select Status using the
  • Humax CX-FOXC | User Manual - Page 61
    Conax CA It displays information about Conax CA-software version, interface version, card number, number of session, language and conditional access system identification. ** Note: The supported funtitons vary depending on CAS version. GB 60
  • Humax CX-FOXC | User Manual - Page 62
    various games for user's entertainment. 1. Press the MENU button. 2. Select Games using the the OK or button. button and press 3. According to the instruction displayed on screen, you can enjoy the game using the button and OK button. ** Note: Press the EXIT or BACK games by pressing the GAME
  • Humax CX-FOXC | User Manual - Page 63
    12. Menu Map 12. Menu Map GB 62
  • Humax CX-FOXC | User Manual - Page 64
    13. Troubleshooting 13. Troubleshooting 13.1 Trouble Shooting Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions.
  • Humax CX-FOXC | User Manual - Page 65
    13. Troubleshooting 7. Cannot watch scrambled channels. ** - Check that you have the appropriate Smartcard. Reinsert the Smartcard and make sure it initializes correctly. - Check in the menu that
  • Humax CX-FOXC | User Manual - Page 66
    Error message No access No card inserted. Incorrect card Possible causes No subscription to this channel. No authorization. Smartcard is not plugged in. Wrong Smartcard is plugged in. Smartcard is not correctly plugged in. Smartcard is broken. What to do Make sure you subscribe to the channel. If
  • Humax CX-FOXC | User Manual - Page 67
    -QAM MPEG-2 ISO/IEC 13818 Transport Stream Specification MPEG2 MP@ML 15 Mbit/s Max 4:3, 16:9, Letter Box 720 x 576 / 720 x 480 MPEG/MusiCam Layer I and II Single channel/Dual channel/Joint Stereo/Stereo 2M bytes 16M bytes 8K bytes GB 66
  • Humax CX-FOXC | User Manual - Page 68
    A/V and Data In/Out Video Audio S/PDIF Power Supply Input Voltage Type Power Consumption Standby Power Protection Physical Specifications Size Weight (Net) Operating Temp Storage Humidity SCART Video Output (CVBS, RGB) SCART Volume and Mute Control (Resolution: 20 bits DAC, MAX, 2Vrms) Digital
  • Humax CX-FOXC | User Manual - Page 69
    15. Glossary 15. Glossary EPG (Electronic Programme Guide) An electronic equivalent to a printed television listings magazine; it is an application that contains updateable chip memory. It is used for accessing Pay TV (encrypted) channel or services when inserted into an appropriate receiver. GB 68
  • Humax CX-FOXC | User Manual - Page 70
    16. Service and Support 16. Service and Support You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when facing a problem. Humax Call Center
  • Humax CX-FOXC | User Manual - Page 71
    16. Service and Support Australia Tel: Opening Hours: E-mail: Website: Language: ** Italy 1800 613 011 Mon 400675 ( 0,12/min) Opening Hours: Mon-Sun 8:00-23:00 Website: www.humax-digital.de Language: Deutsch/English/Turkish ** Note: For hardware repair, please visit our website. GB 70
  • Humax CX-FOXC | User Manual - Page 72
    HUMN-CXFOXC+.100 DE

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.