Hunter 21623 Owner's Manual - Page 14

8 •Glass Installation Installing the Glass Bowl 8-1. Remove protective foam ring from threaded portion of light kit/speaker assembly. 8-2. Install B10 candelabra bulbs (40 Watt Maximum) into the sockets. 8-3. Place the glass bowl over the light kit/speaker assembly, ensuring the threaded portion of the light kit assembly comes out of the bottom of the glass bowl. 8-4. Place the finial over the threaded portion of the light kit/speaker assembly and twist it as shown to tighten it against the glass bowl. 8-5. Thread the fan pull chain through the pull chain guide. Light Bulbs (B10 Candelabra Base 40 Watt Maximum) Finial Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 14 45049-01 • 07/13/09 • Hunter Fan Company Threaded Portion of Light Kit Assembly Glass Bowl Steps 8-2 - 8-4 Breakaway Connector Fan Pull Chain Pull Chain Guide Step 8-5